PDA

View Full Version : 2007 prius chip



ninja123
24th August, 2015, 08:11 AM
Can anyone tell me what transponder is inside a smart key from a 2007 toyota prius?

Customer said they changed battery and lost chip!

I think its a 4D67 but not sure what page 1 data is needed.

ninja

bram380
24th August, 2015, 01:49 PM
Prius with immo 89780-47xxx use ID4D 30 50 90

ninja123
24th August, 2015, 09:19 PM
Thanks bram, but im not sure what immo is on this car yet!

Can avdi do this by obd or is it immo box out only?

ninja

JJ77
24th August, 2015, 09:35 PM
avdi surely can do the immo reset trough obd, have done few times thats only for prius gen2 models. also u can use other key programmers and do the 16min reset via obd.

Bllinda
30th August, 2015, 11:42 AM
You can still try to check here .... (http://www.japan-parts.eu/toyota/eu/2007/prius/nhw20l-aheebw/2_222220_001_358W/electrical/8424_anti-theft-device)


Thanks bram, but im not sure what immo is on this car yet!

Can avdi do this by obd or is it immo box out only?

ninja

cjawahir
30th August, 2015, 01:49 PM
Can anyone tell me what transponder is inside a smart key from a 2007 toyota prius?

Customer said they changed battery and lost chip!

I think its a 4D67 but not sure what page 1 data is needed.

ninja

no it not id67,

this is page 1 ---34

or page 1 -----B4

cj

ninja123
31st August, 2015, 04:45 PM
i tried with avdi and transponder starting page1=34, key light still flashing, but car is starting, diag say transponder fault?

Do I need page1=B4 for this?

ninja

cjawahir
31st August, 2015, 06:23 PM
did u add key via obd or eprom ?


cj

ninja123
1st September, 2015, 08:04 AM
obd with avdi, using a used key.

WISETIGER
1st September, 2015, 11:01 AM
Did you programm one key or 2 keys?

ninja123
1st September, 2015, 09:56 PM
I did try to program only one key, I put in and out of slot 5 times, still the same.

Today the owner find the lost transponder, put in key and works perfect ????

1: why my key not program correctly?

2: how did old transponder still work if immo was cleared?

I read his transponder and page 1 is 34

ninja

cjawahir
2nd September, 2015, 01:06 AM
his key is still there in the immo dump , u need to close programming, insert the key press the button two times until ignition on then then off and remove key five times quickly , it will close programming /


cj

treysis
26th October, 2023, 07:19 AM
If I buy blank 4D67 do I need to prepare it somehow?

snapperlawnmower
26th October, 2023, 03:31 PM
If I buy blank 4D67 do I need to prepare it somehow?

A 4D67 isn't blank, it is formatted for use. A generic 4D60/4D70 can be formatted to work with various cloning devices. An XT27 formatted with the VVDI/Xhorse cloner will work. B4/54/34 password type.

treysis
26th October, 2023, 07:02 PM
So the 4D67 off of ebay are useless? It would be ok to program the new transponder to the immo. Doesn't need to be a clone of the original I have in my other master key.

snapperlawnmower
27th October, 2023, 02:24 PM
So the 4D67 off of ebay are useless? It would be ok to program the new transponder to the immo. Doesn't need to be a clone of the original I have in my other master key.
4D67 is not the right format for the Prius.

treysis
28th October, 2023, 09:25 AM
4D67 is not the right format for the Prius.

Which is the right format?