HILUX 89780-71030 IMMOBOX KEY EDIT

[PAVLOS2]

Hi to all I need to edit a key in this file.
Car has lost all keys and I only have tpx2 blank transponder,Can someone please sent data to write in tpx2

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=327856&stc=1

[ngakson2002]

Hi to all I need to edit a key in this file.
Car has lost all keys and I only have tpx2 blank transponder,Can someone please sent data to write in tpx2

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=327856&stc=1

Hello Mate,

Your dump belongs to a 4D G-chip transponder.Find attached here the reset dump in auto learning mode ready to register a transponder data

Procedure:

1) Program the eeprom with the dump and fit the immo back to the car
2) Get a key with transponder 4D G - chip Page1: 36
3) Cut the key
4) Insert the key in the ignition switch and switch ON and OFF 5 times then Start the car.

Check PM for Pass

Best Regards, Serge

[PAVLOS2]

Thanks for reply I can make immobox to do auto learning with no problem,My question is if a tpx2 transponder is compitable with this immobox cause I don't have a 4D 60 g type transponder.If yes what to write to TPX2 cause its blank.

[bram380]

tpx2 is 40bit.
but you can use it with little modified.

Sent from my HM 1S using Tapatalk

[PAVLOS2]

tpx2 is 40bit.
but you can use it with little modified.

Sent from my HM 1S using Tapatalk

Ok can you please help about how it must be done ??

[bram380]

read key
post here it

[PAVLOS2]

read key id67 (32, 52 or 52)
post here it

Here it is

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=327951&stc=1

[bram380]

Here it is

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=327951&stc=1

can you read the code?

[PAVLOS2]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=327977&stc=1

[bram380]

here u go:

[PAVLOS2]

here u go:

I get B2795 key code unmatched after ign on off 5 times.

[bram380]

ok.
you need g-chip 80bit

[bram380]

Hi to all I need to edit a key in this file.
Car has lost all keys and I only have tpx2 blank transponder,Can someone please sent data to write in tpx2

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=327856&stc=1

You have Abrites.
So you sholud can solved it.

[Bllinda]

Is this program works with a mini zed-bull?

Here it is

[PAVLOS2]

You have Abrites.
So you sholud can solved it.

Well I dont know how and never made a master key for this type thats why Im asking for you help.
I have tryed editing 56 on page 1 but it wont work

[PAVLOS2]

Hi
I programed original key but now getting DTC 2799
bridged 4 with 13 for 1 hour . Car starts and dies again.
Strange thing I see is in immo data list I see (immobilizer set) and it will start for 5 secons the dies and I get (immobilizer unset) If I wait for 1 or 2 min with ing on staus shows again (immobilizer set) and it will start for 5 seconds again. Please help Thank you.

[PAVLOS2]

Here is original key data

[PAVLOS2]

how u programmed the key?

Reseted immo ori file in ABRITES address line 110 and then key on key off 5 times .Immo light off and master key registerd in data list

[bram380]

i don't have abrites,
but try this dump to start the cars:

[PAVLOS2]

i don't have abrites,
but try this dump to start the cars:

Dump needed to register key again, Starts and die again .
I jumped 4 and 13 again to see what will happen but I am afraid that we will have the same result

[PAVLOS2]

Nope same story:05.18-flustered:

[bram380]

try again:

[PAVLOS2]

try again:

Same ~~~~ !!!! Starts and dies.

[PAVLOS2]

Thanks to all the people that helped me on this


Sent from my iPhone using Tapatalk