PDA

View Full Version : Autocom cdp cannot read BMW e63 630i



AlexG40
25th August, 2015, 12:58 PM
Hello guys

I own a autocom cdp but it cannot connect with a friends e63 630i.
I have heard that there is a solution with the cdp board.
Is there anyone that i can guide me, what can i do?

morgano
25th August, 2015, 07:20 PM
CDP+ or CDP Pro? One PCB or two PCB in sandwich?

AlexG40
28th August, 2015, 07:57 PM
Any ideas guys?

cocutanu
28th August, 2015, 10:40 PM
Any ideas guys?

You should remove D701 and D703 from your PCB. Post some pictures and I'll show you which ones.

osoriko
5th September, 2015, 02:36 PM
firmware 2012,3 ok

AlexG40
6th September, 2015, 05:55 PM
Here is 2 pictures of my cdp board.
Does anyone knows how to fix my connection problems?
What should i do with the boards?

atomiczen
6th September, 2015, 06:56 PM
single board clone work without issue on that car
for fix your board you have to change 2 diode on the back of the first picture board

cocutanu
6th September, 2015, 10:53 PM
At this rate coming back to forum to get helped I can conclude that you don't need your stuff badly :)
Anyway, the answer was already told. ReMOVE D701 and D703 from the back of the PCB from your first picture.

AlexG40
6th September, 2015, 11:03 PM
Remove these 2 ones D701 and D703? Only that?
Should i solder something else in the previous positions?

morgano
7th September, 2015, 12:24 AM
Remove these 2 ones D701 and D703? Only that?
Should i solder something else in the previous positions?

1n4148 in place of the removed ones.

cocutanu
7th September, 2015, 11:55 PM
Remove these 2 ones D701 and D703? Only that?
Should i solder something else in the previous positions?

You don't have to solder ANYTHING back there. That's the reason I said REMOVE.
Good Luck :)

atomiczen
8th September, 2015, 10:05 PM
You don't have to solder ANYTHING back there. That's the reason I said REMOVE.
Good Luck :)
i have switched to 1n4148 like morgano and i solved any bmw issue.
never tried without

obdrepair
22nd October, 2015, 03:30 PM
i have switched to 1n4148 like morgano and i solved any bmw issue.
never tried without

Is this also possible with newer VCIs with single PCB or rather required for BMW E60?

For example with this

http://fs5.directupload.net/images/151022/cr4jibrf.jpg

Or this one

http://fs5.directupload.net/images/151022/fxgmqn6j.jpg