PDA

View Full Version : YOU WILL LIKE THIS



teamtuner
25th August, 2015, 09:11 PM
install can be done without internet conection...please read "README" file
download link:
https://mega.nz/#!lAZXkQIQ!tlbFYTn5l1V2dzs2ewP8krEQg_UZ6paYXoM9VAg mQbg

cdex
25th August, 2015, 09:17 PM
hi

what is this?

Regards

teamtuner
25th August, 2015, 09:28 PM
hi

what is this?

Regards
You don't have to download it if you don't want to.:banghead::banghead::banghead:

cdex
25th August, 2015, 09:37 PM
don?t you think it will be better if put a real name on it ? or everyone need to download to see what it is...

teamtuner
25th August, 2015, 09:47 PM
is your choise mate to download or not..:dad:


upssss...i forgot....as you say:don"t forghet...thanks and reputation....:roflmao::roflmao::roflmao:

fouadal
25th August, 2015, 09:54 PM
I can see it is autodiag? But how could we use it?

pulsar2000
25th August, 2015, 09:56 PM
yes autodiag ? but what tool to use sw with, see 850 mb or so,
c`mon a hint what tool to use ?

otherwise pointless download,

teamtuner
25th August, 2015, 10:17 PM
the interface from k china will work better with this....:party:

pulsar2000
25th August, 2015, 10:31 PM
the interface from k-tag china will work better with this....:party:

so we have car diagnostics tool after we remove ecu ??? dont get it man

teamtuner
25th August, 2015, 10:44 PM
and :bounce:
adapted version

CustomCars
25th August, 2015, 10:47 PM
LOL.
All clear, this is Transdata. Solution for switch standard soft into DIM.
I will check it quickly.

CustomCars
25th August, 2015, 11:40 PM
Solution fully works r/w, software... can like but not the best, much faster than ori that's sure.

But.... only 20 programming ?

Nio
26th August, 2015, 12:24 AM
And for New Genius did you have something?

teamtuner
26th August, 2015, 06:16 AM
Solution fully works r/w, software... can like but not the best, much faster than ori that's sure.

But.... only 20 programming ?
you have more into your k...return to kept and recharge

teamtuner
26th August, 2015, 07:51 AM
time limited....tic-tac

CustomCars
26th August, 2015, 08:32 AM
Sure i have more, i will check ept. But you can have right :-)
Today try Denso and after that token reset.

bersch8688
26th August, 2015, 09:12 AM
install can be done without internet conection...please read "README" file
download link:
https://mega.nz/#!lAZXkQIQ!tlbFYTn5l...paYXoM9VAgmQbg (https://mega.nz/#%21lAZXkQIQ%21tlbFYTn5l1V2dzs2ewP8krEQg_UZ6paYXoM 9VAgmQbg)


Mega Link is DOWN

please Upload again

Thanks

Nio
26th August, 2015, 09:38 AM
Really nice job. Perfectly working.

CustomCars
26th August, 2015, 09:45 AM
Mega Link is DOWN
Because clock is running out. Testing time

teamtuner
26th August, 2015, 12:47 PM
Sure i have more, i will check ept. But you can have right :-)
Today try Denso and after that token reset.
today worked denso opel astra j 2010 year...perfect jod done...on writing mod file,it asked if do cecksum corection...accept...ask for original file...select original file...done...cecksum ok....write microcontroller 10 minutes

puiu
29th August, 2015, 09:39 PM
Any chance to upload again ?
thanks

Puiu

pulsar2000
29th August, 2015, 09:44 PM
whats the big news with this trasdata ? why better than k tag ?
more protocols ? i dont get it,,,,,
someone please let me know the low down on why so good,,,,,

teamtuner
29th August, 2015, 10:50 PM
the free solution is served...you can test...only if you want....why before testing need commentary?

pulsar2000
30th August, 2015, 08:43 AM
the free solution is served...you can test...only if you want....why before testing need commentary?

you have a pm,

teamtuner
30th August, 2015, 11:34 AM
i saw...thanks

heteromies
30th August, 2015, 01:59 PM
How to install this? There is two soft, ktm100 and new trasdata, what to use with ktag, where to put patch etc?

teamtuner
30th August, 2015, 03:34 PM
read please "READ ME" file...it said...setup...then patch...

Mulatre
30th August, 2015, 04:46 PM
Could you share it again, please? :)

pulsar2000
30th August, 2015, 05:47 PM
whats deal with tokens, cant see info in readme, and if i save my k tag ftdi settings i can go back to k tag ?
i can use this tool online ? or i get blocked ?
thanks

heteromies
30th August, 2015, 06:11 PM
read please "READ ME" file...it said...setup...then patch...

Yes, have readed it many times.... but, to where installing patch? to patch Default path? Which icon(KTM100 or NEW trasdata) should use for start program? This soft doesn't work with Windows 10?

Sorry if i disturb your thread :(

pulsar2000
30th August, 2015, 06:16 PM
agreed, need more info on this please, you tube link would be awesome...

teamtuner
30th August, 2015, 08:17 PM
Yes, have readed it many times.... but, to where installing patch? to patch Default path? Which icon(KTM100 or NEW trasdata) should use for start program? This soft doesn't work with Windows 10?

Sorry if i disturb your thread :(
make a print screen photo with all content of what you downloaded...and i will say what need to do

teamtuner
30th August, 2015, 08:19 PM
whats deal with tokens, cant see info in readme, and if i save my k tag ftdi settings i can go back to k tag ?
i can use this tool online ? or i get blocked ?
thanks
no use on line...is a clone
return to ktag for renew tokens,then switch again to new sw..

pulsar2000
30th August, 2015, 09:14 PM
no use on line...is a clone
return to ktag for renew tokens,then switch again to new sw..
so 20 tokens, with sw, i understand now, great share,,

teamtuner
31st August, 2015, 11:06 AM
https://yadi.sk/d/QzwXLMwHiktd6
another solution from "mother russia"...not tested

pulsar2000
31st August, 2015, 04:29 PM
no use on line...is a clone
return to ktag for renew tokens,then switch again to new sw..

is normal to have a config server error on start prog ?

only thing not clear on is this ? AUTODIAG START-INFO PLUGINS-UPDATE ALL MANUALS PDF-CLOSE PROGRAM
i do this online ???

teamtuner
31st August, 2015, 07:08 PM
normal error...update without interface conected...yes-on line

heteromies
31st August, 2015, 11:21 PM
make a print screen photo with all content of what you downloaded...and i will say what need to do

After setup done, there is two folders(KTM100 and Trasdata with .exe's) So which one need to use and which one need patch?

pulsar2000
31st August, 2015, 11:33 PM
After setup done, there is two folders(KTM100 and Trasdata with .exe's) So which one need to use and which one need patch?

mate get rid of official 1st shortcut, 2nd one that not so official looking one is the one you want,,,, :>

heteromies
1st September, 2015, 01:30 AM
mate get rid of official 1st shortcut, 2nd one that not so official looking one is the one you want,,,, :>

OK... And to where, which folder should extract/installing that patch then...? KTM100 or Trasdata....

teamtuner
1st September, 2015, 07:11 AM
OK... And to where, which folder should extract/installing that patch then...? KTM100 or Trasdata....
mate you are...i said...use setup for install...then use double click on icon of patch...and end...after that use program...why you go to search what folder or other shi+ ?

heteromies
1st September, 2015, 03:13 PM
mate you are...i said...use setup for install...then use double click on icon of patch...and end...after that use program...why you go to search what folder or other shi+ ?

OK, try that. Because after setup.exe done, there is those folders, not onky trasdata :(

pulsar2000
1st September, 2015, 03:16 PM
i got work ok, but only (16) writes, not 20, and i cant update manuals it gives me a error, i disconnect tool, and connected to wifi,

teamtuner
1st September, 2015, 08:38 PM
16 writes because you have on your ktag only 16 rested...change internet conection for update all manuals

moky
1st September, 2015, 08:53 PM
If you want to help teamtuner,help all people here on forum not just some minutes or some persons ......... and be clear.....

teamtuner
1st September, 2015, 09:02 PM
all info are into readme file...need a little more attention...and brain.exe mate...why other users can do all ok?....more brain.exe maybe?...we crack cars softwares.tune cars,other shi+ and can"t use installer and path.exe file...pfff...what world

moky
1st September, 2015, 09:10 PM
your link is out...and brain.exe yes all people here know that bravo

pulsar2000
1st September, 2015, 09:21 PM
i use my BRAIN.EXE very well and my English Perfect , i read your readme very well indeed,
yet i get no update of manuals i have a error, yet your sw works ok, i can see all built in pdf docs,
in your readme does not say at what stage to install drivers, as i know you need to scroll to drive folder to run driver install,

Great work mate, but a better Readme, for less Brain.exe for us please :ciao:

teamtuner
1st September, 2015, 09:22 PM
if is out...there are many users that can share it...why they don"t do it ?:dead:

moky
1st September, 2015, 09:26 PM
YOU ARE THE BEST !!!!!!!!!!!! WE REALLY LOVE YOU

teamtuner
1st September, 2015, 09:35 PM
i use my BRAIN.EXE very well and my English Perfect , i read your readme very well indeed,
yet i get no update of manuals i have a error, yet your sw works ok, i can see all built in pdf docs,
in your readme does not say at what stage to install drivers, as i know you need to scroll to drive folder to run driver install,

Great work mate, but a better Readme, for less Brain.exe for us please :ciao:
i will help you...then you can explain better...give me teamwiever id and password...NOW

teamtuner
2nd September, 2015, 06:16 AM
limited time....today.....Correct !

Have a gander here mate : Forum Rules (http://www.digital-kaos.co.uk/forums/showthread.php/2-Forum-Rules)

kristikapa
2nd September, 2015, 09:55 AM
Since the link from teamtuner is dead, can someone reupload transdata please?

blackpirate
2nd September, 2015, 03:09 PM
all info are into readme file...need a little more attention...and brain.exe mate...why other users can do all ok?....more brain.exe maybe?...we crack cars softwares.tune cars,other shi+ and can"t use installer and path.exe file...pfff...what world

i ve forgot my brain.exe at home:P

stupid question..it needs internet off or its enought firewall it


2. how tokensa are added..i mean cgf


edit: i just installed the sw didnt got interface yet to test
maybe tonight

thnx in advance

edit2:
what u recommend to be used:
ktag or transdata?(stability bug fixes etc)

teamtuner
2nd September, 2015, 03:32 PM
driver need to switch with mprog to ept trasdata...tokens are same that you have inside with ktag...renew need to switch to ept ktag,renew tokens with ksuite,and return to ept trasdata to continue...i use tras...more stable,more info...fixed bugs.......no internet when you use...is a clone...more info if you touch thanks buton....:dad:

teamtuner
2nd September, 2015, 03:33 PM
Since the link from teamtuner is dead, can someone reupload transdata please?
open your eyes...open your mind...use brain.exe ...link is ok...is up your head...tic...tac...time is limited

blackpirate
2nd September, 2015, 04:08 PM
@teamtuner
all clear now man !
thnx

teamtuner
2nd September, 2015, 05:35 PM
time out...regards

kristikapa
2nd September, 2015, 08:54 PM
The link above my post is ecm titanium database... :) It was actually, becauase it died in the meantime. :))

pulsar2000
17th September, 2015, 10:16 AM
ok i tried sw, now i want to go back to ktag, i use mprog, and load original file i read as k tag, now i have dataloader as usb device, and no i didnt have internet on the pc, so how i fix back now please ??

heteromies
17th September, 2015, 03:14 PM
ok i tried sw, now i want to go back to ktag, i use mprog, and load original file i read as k tag, now i have dataloader as usb device, and no i didnt have internet on the pc, so how i fix back now please ??

Back to what? dataloader as usb device is correct when use Ktag -interface. Of course you have to be both .ept for Trasdata and Ktag. And after programming have unplug usb and plug again, then can use interface.....

pulsar2000
17th September, 2015, 07:08 PM
Resolved, thanks to ecu tuners :>
thanks hetromies, but didnt work as what i backed up as. wouldnt connect with k suite,
Ecu tuners edited ept and all ok now,,,

teamtuner
17th September, 2015, 07:23 PM
ufff...ecu tuners edited the .ept?
ahahahhaahahaha...edited......pfff

pulsar2000
17th September, 2015, 08:00 PM
ufff...ecu tuners edited the .ept?
ahahahhaahahaha...edited......pfff

No no, he editited my original k tag ept, as what i backed up, wouldnt connect with k suite,
and when need to reset we have to revert to k tag,,, unless u know other

gazvts
17th September, 2015, 09:58 PM
When you reprogram new ept file is the use fixed serial selected if it is try with it not selected vice versa

pulsar2000
17th September, 2015, 10:05 PM
Tried allways Gaz, was a no go, the old sw, didnt like it,
i was sort of stuck with trasdata or nothing,
i deffinately backed up ept 100% or so i assumed,

gazvts
17th September, 2015, 10:31 PM
Least your sorted anyway mate :fat:

teamtuner
18th September, 2015, 06:51 AM
this is ori ept

eddieddi
21st September, 2015, 12:49 AM
Any one can upload again please ?

BR

teamtuner
22nd September, 2015, 11:41 AM
.................................

Apsik
18th October, 2015, 02:00 PM
Works perfrct!!!

teamtuner
18th October, 2015, 05:38 PM
Works perfrct!!!
i know...:fat:

barguelille
29th December, 2015, 05:11 PM
Mega Link is DOWN

please Upload again

Thanks

galiza
8th June, 2018, 11:20 AM
Somebody can re-up please?

Thanks&regards