PDA

View Full Version : flash reading edc16c34


totalkey
26th August, 2015, 01:37 PM
i tried today read flash on partner 2010, with avdi, i got disconnected on 1% reading, after that motor making knocking noise on idle, after this i read again the flash again without a problem, its possible i destroyed the flash file?
this is what i read

328204
wiski
26th August, 2015, 01:42 PM
What do you mean by destroying file?
Read out is fine.
totalkey
26th August, 2015, 01:45 PM
i mean if it can corrupt the flash by only reading?
are you sure the file i uploaded is fine? because i compared to different files and it is look allot of fffff in the beginning
thanks
totalkey
26th August, 2015, 01:47 PM
injectors coding are inside flash?
wiski
26th August, 2015, 02:04 PM
This is partial read , only calibration data inside. No injector coding inside. If you unsure why not do it by BDM.
totalkey
26th August, 2015, 02:07 PM
This is partial read , only calibration data inside. No injector coding inside. If you unsure why not do it by BDM.
Because Costumer not sure he wanted the tuning, so the file look OK?

Sent from my VOYAGER2 DG310 using Tapatalk
wiski
26th August, 2015, 02:09 PM
File is fine.
totalkey
26th August, 2015, 02:16 PM
OK Thanks, for helping Me

Sent from my VOYAGER2 DG310 using Tapatalk
bobolin4o
26th August, 2015, 05:52 PM
Because Costumer not sure he wanted the tuning...

WTF???
The customer is UNSURE...?
Maybe, you must to persuade him to make his car stronger???
Personally, I'd cast it... might beat him up...
Cheers!
totalkey
26th August, 2015, 06:11 PM
WTF???
The customer is UNSURE...?
Maybe, you must to persuade him to make his car stronger???
Personally, I'd cast it... might beat him up...
Cheers!
I Just tried to read it and see if I can do it by obd, also he got egr error and after I read it and start the car he say that now car making noises (sound like knocking, Maybe lost injectors coding? )

Sent from my VOYAGER2 DG310 using Tapatalk
wiski
26th August, 2015, 07:46 PM
Did you scan it for errors before and after you read it?

Sent from my GT-I9100 using Tapatalk
totalkey
26th August, 2015, 07:51 PM
Did you scan it for errors before and after you read it?

Sent from my GT-I9100 using Tapatalk
I am not remember but I think I did

Sent from my SM-T530 using Tapatalk
wiski
26th August, 2015, 08:03 PM
I am not remember but I think I did

Sent from my SM-T530 using Tapatalk
So do you now which ones where or are actually?

Sent from my GT-I9100 using Tapatalk
totalkey
26th August, 2015, 08:07 PM
So do you now which ones where or are actually?

Sent from my GT-I9100 using Tapatalk
I didn't understand your question

Sent from my SM-T530 using Tapatalk
wiski
26th August, 2015, 08:14 PM
Error codes mate.

Sent from my GT-I9100 using Tapatalk
totalkey
26th August, 2015, 08:29 PM
The error code is egr not complete setting is done or something Like This, send him to dealer to update setting

Sent from my VOYAGER2 DG310 using Tapatalk
totalkey
26th August, 2015, 08:32 PM
I also did him km change in dash, but I don't see how it can change something in engine behavior

Sent from my VOYAGER2 DG310 using Tapatalk
honingkoning
29th August, 2015, 11:22 AM
I also did him km change in dash, but I don't see how it can change something in engine behavior

Sent from my VOYAGER2 DG310 using Tapatalk

Maybe tou should change milleage in ecu also.
I dont think this can cause that problem, but you can give it a try.

Wbr.