PDA

View Full Version : Mazda 6 RF7K engine remove FAP



illestibor
27th August, 2015, 09:40 PM
Hello.I have a mazda 6 RFK with dpf problem.After reset the DPF light wil come back in 30km.I checked some solution without good success.Here is a switch solution?Because i tried to modyfy some maps, some switches so, but car smoke.
Have somebady the good solution for this ecu?If yes can help me to resolve this problem.here is the original dump readed and attached.

328495

Thanks for any help.

Nio
28th August, 2015, 08:10 AM
This car don't have switch solution but emulation ( my experience ), so give all dtc present on your car and wait to be helped...Best regards.

illestibor
28th August, 2015, 09:38 AM
So there is only some complicated solution only with remove some maps from dump, for this type of ecu?Some people say that have solution for this type of ecu.Can be true?
thanks.the dtc is refer to the dpf eficiency.

monter8484
28th August, 2015, 09:57 AM
im always use volta for them ecus never had any problem. Volta dosnt work with 2.2 diesel but its ok on rf7. before you read map reset all values first. If you have smoke check injectors seals and oil level.

Babos
28th August, 2015, 10:01 AM
im always use volta for them ecus never had any problem. Volta dosnt work with 2.2 diesel but its ok on rf7. before you read map reset all values first. If you have smoke check injectors seals and oil level.

:DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
no coments

tunertool
28th August, 2015, 10:28 AM
Oh my god... no wonder I am always fixing peoples mess :05.18-flustered:

illestibor
28th August, 2015, 12:06 PM
So can remove somebody with manual solution that work?thanks for help.

dean 21
28th August, 2015, 09:30 PM
Hi, here is your file, pass in pm