PDA

View Full Version : BMW F10 550i 2010 ECU



Fec001
29th August, 2015, 12:54 PM
Hi!
As I know this car should have MEVD17 ecu what can be programmed with galetto through boot mode. Am I right?

Prime
29th August, 2015, 05:02 PM
K-tag or CMD

Fec001
31st August, 2015, 08:54 AM
on Gal list there is MEVD 17.2 ECU boot mode. I will check car what ECU have.
According to Bosch ESI tronic, car has got Siemens MS 85 ECU.

overs0ull
31st August, 2015, 08:57 PM
k-tag make it not problem

Fec001
31st August, 2015, 10:20 PM
I saw kess can do it but don't know alientech devices well

chiptuner8
2nd September, 2015, 06:01 PM
That car have Siemens... impossible to do it (I has 1 and no possible to do with any tool)

Regards

Fec001
3rd September, 2015, 09:31 AM
Then, what is the truth?

Nio
3rd September, 2015, 02:08 PM
KESS can do this car without open ecu But is 520i 184HP, not 550i...Family 254 OBDII. Fgtech can do it tool boot. Best regards.

chiptuner8
3rd September, 2015, 06:12 PM
Then, what is the truth?

Can you check if the ECU is Siemens?

Fec001
3rd September, 2015, 06:36 PM
KESS can do this car without open ecu But is 520i 184HP, not 550i...Family 254 OBDII. Fgtech can do it tool boot. Best regards.

It's siemens msd85 family 202
Are you sure its bosch ecu?

Nio
4th September, 2015, 10:00 AM
I'm sure on the car i write not on yours. You have car so you can see. If is Siemens you need to change your request.
"Hi! As I know this car should have MEVD17 ecu what can be programmed with galetto through boot mode. Am I right?"
Yes, i'm sure...I make 520i and have MEV17.46 254 Family.

Fec001
4th September, 2015, 10:23 AM
ok but after I realized it has MSD85 :D

Nio
4th September, 2015, 10:56 AM
So, problem solved. Good work mate.