Toyota Quantum immo ecu set needed 89661-26D80 amd immo 89780-26150

[actionx]

Hi guys i need Toyota Quantum immo and ecu set needed 89661-26D80 amd immo 89780-26150

Ecu no: 89661-26D80 93c56 eeprom
Immo no: 89780-26150 93c66 eeprom

And if possible if two keys can be written in immo file here is key data

Key1 : Pg1(92) pg2(62) pg3(65 4F C7 14) pg4(00 00 00 00)

Key2 : Pg1(52) pg2(58) pg3(4A 20 A8 14) pg4(00 00 00 00)

I have tried different files around dk not coming right getting b2799 and after align Van wants to start code comes back after battery removal b2799 so would like a matching set with keys in dump if possible.

Thanks Regards
Actionx

[actionx]

Hi could anyone help plz i have two with the same problem

Regards

[cjawahir]

post the data u get from the car

cj

[ecufix]

Here you are ,you can use the matched set or you can sort your immo out and load the virgin file into the ecu without the need for the 30 minutes bridging out pin4 and 13 on the diagnostic plug to realign regards

[actionx]

post the data u get from the car

cj


here is data from car with keys in but immo light still flashing

[actionx]

ok immo light fine used seggs immo 2 7 and write keys so wrote seggs ecu 2 7 but still not stating not even starting and stalling will do scan an report

[cjawahir]

u need to read the engine ecu too , so we can match the pair

cj

[actionx]

u need to read the engine ecu too , so we can match the pair

cj

With seggs ecu 2 7 and seggs immo 2 7 i got b2799 error so loaded petrol 27 vvti qntm 93c56b 80 virgin ecu b2999 error gone engine wants to start so think immo and ecu ok maybe coil packs faulty because it fires sometimes but not starting

[cjawahir]

your mapping maybe diffrent from his , so u may have have that misfire problem , post you ori data .

cj

[ecufix]

Use the virgin file in the ecu

[actionx]

Use the virgin file in the ecu

I did use the virgin file

[TumiSA]

Here you are ,you can use the matched set or you can sort your immo out and load the virgin file into the ecu without the need for the 30 minutes bridging out pin4 and 13 on the diagnostic plug to realign regards


Thanks Ecufix, your files worked on mine :shakehands:

[tafadzwa]

hi everyone

can anyone help me with immo off for this ecu 89661-26D80