PDA

View Full Version : MED 17.1 Trouble after Chiptuning Info !!!



258
4th September, 2015, 06:46 AM
Hi,
MED 17.1
Control Module Part Number: 8R0 907 115 A HW: 8K2 907 115 D
Component and/or Version: 2.0l R4/4V TF H20 0007
Software Coding: 0121000C240F0160
ASAM Dataset: EV_ECM20TFS8R0907115A A02008 (AU48)

from V.A.G. after chiptuning and few months , get 2 errors
4527 - Coolant Fan Control Circuit 1
P0480 00 [039] - Electrical Malfunction

4608 - Fuel Pressure Regulator Valve (N276)
P2294 00 [039] - Open Circuit

Noise in the pump and fan is running after the engine off 5 min, Dealer maintains ECU is broken.

I solved this Problem with Hot Air and Flux .
I hope this info help you.

wiski
4th September, 2015, 08:04 AM
You mean you reflowed whole ecu board or particular component?

morgano
4th September, 2015, 08:19 AM
So dealer was correct, ecu was literally broken.


Regards,

258
4th September, 2015, 03:45 PM
You mean you reflowed whole ecu board or particular component?
Mcu and right site from board

wiski
4th September, 2015, 05:36 PM
Probably not been re-sealed if it worked for few months as you say.