View Full Version : Golf 5 VDO error
daewo97
11th September, 2015, 05:54 PM
I have a Golf 5,VDO 1K0920860E, that displays error instead of KM...and has DTC 00003 Control Module defective
I read dump with SMOK
I need a good dump to make a sample
honingkoning
11th September, 2015, 09:27 PM
I have a Golf 5,VDO 1K0920860E, that displays error instead of KM...and has DTC 00003 Control Module defective
I read dump with SMOK
I need a good dump to make a sample
Check if they removed some led from pcb. (Airbag,ABS).
Had this several times now.
Wbr.
daewo97
12th September, 2015, 06:21 AM
Thank you, today dismantled and check..
daewo97
12th September, 2015, 08:18 AM
led from pcb it ok
thephenom
12th September, 2015, 12:43 PM
When you turn off ignition, it also shows Error or km instead?
daewo97
12th September, 2015, 04:53 PM
if turn off ignition show km...If you disconnect the battery, and reopens ... appears km but after a short distance, appears error....and again I have to remove the battery
djoko.k
12th September, 2015, 09:31 PM
Check if immo is off...
daewo97
13th September, 2015, 01:09 PM
I did Immo off to such a machine and does not appear in the instrument cluster error
immokill
29th April, 2016, 12:18 PM
I have same problem .
Led for airbag was removed .. put new led ; and error is still here. In my case. Wit other dash no+ Mfd all ok. .
Im digiprog 3 there is option error repair on vdo and visteon . But if put message : unsoporded function. .???
Still in problem.
Regardds
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.