Renault Secnic 1.9 130HP HELP

[BrunoPT]

I have here a little big problem.
Read the car with fgtech and read at only code injectors, it turns out to send the reprogrammed the car is over gave error, and now I can not encode injectors. The car did not even from the start.
Now to identify the car appears all to zero.


Someone can help me?
Next follows bdm files read by and OBD together with the reading codes injectors


data:
Renault Scenic 1.9 DCI 130CV
Year: 2011
Bosch EDC16cp33
0281015798
237100055R


What seems to me that the problem is in EEPROM.


Thank you

[mihaiservice]

Hi
few years ago i got a problem with one laguna,after many diagnostic tools i have managed to recode injectors ONLY with ESI KTS !

[CustomCars]

One time i too have problem with injector codes, backup file have error.. Now best solution is KESS backup, 100%

At first step write other full bdm dump into all ecu. Then try
Next needed have CLIP and write codes directly from injectors.

I think you messed up something in checksum. Car will be start without coding

[BrunoPT]

One time i too have problem with injector codes, backup file have error.. Now best solution is KESS backup, 100%

At first step write other full bdm dump into all ecu. Then try
Next needed have CLIP and write codes directly from injectors.

I think you messed up something in checksum. Car will be start without coding

With kess does not work because it gives me to identify chassis number error

[BrunoPT]

I need full bdm for this ecu

Bosch 0281015798
237100055R

[Babos]

Found me in skype i try help you.
i try answer to you in PM but your PM is full.

[mihaiservice]

Your flash file are OK !
if you have Clip i can make it virgin eep for your ecu



Mike

[BrunoPT]

sure, but the colleague who lent the clip, I had to return it

[BrunoPT]

Solved

Thank you all guys.

Special Thanks to Babos, It helped without any problem

[MarcaEV]

Hi!
I have the same problem... how to solve it?