Fiat Punto 1.2 IAW 16F.E3 Immo Off Help

[Tawe]

Hi. I need to immo off Magneti Marelli IAW 16F.E3/2A25-1B from Fiat Punto 1.2

I read original dump from MCU HC11 (2F37E), and make it off with IUD and AeTool, but not working.

As I see, I need to write in line 0x120 in format FF FF FF FF FF FF 00 00 FF FF FF FF FF XX XX XX

Where I go wrong ?

331731

[vlaki electric]

try this,report... 331735

[Tawe]

try this,report... 331735
Is this testet solution ? Do you generate it from some software or manually edited ?

Because it is not easy to me to solder again and again points to read motorola :)

Thanks!

[vlaki electric]

this is no tested solution,you be first if you test.:) its from software is not manually. i think you need emulator for this ecu

[antwnhszr]

Hi. I need to immo off Magneti Marelli IAW 16F.E3/2A25-1B from Fiat Punto 1.2

I read original dump from MCU HC11 (2F37E), and make it off with IUD and AeTool, but not working.

As I see, I need to write in line 0x120 in format FF FF FF FF FF FF 00 00 FF FF FF FF FF XX XX XX

Where I go wrong ?

331731

start your car m8....you don't need anything else..
regard's

[furio]

tanks for file , very good

[hp1275]

Hello.
In this file you unpluged immo box?
Thank you.