PDA

View Full Version : VAG EDC17 Tricor TC1796 write



tiguan
20th September, 2015, 04:57 PM
Hi all, Need help

VAG EDC17 Tricor TC1796, I have read with this GallettoV54 completely READ_ALL is OK
I now want to write back, write stops 3%. car will not start.

I used 2x Galletto failed. someone has an idea. what can I do, this is write protected.

http://i62.tinypic.com/30sgapw.jpg

http://i60.tinypic.com/2mxhf6v.jpg

Thank you

Babos
20th September, 2015, 04:58 PM
post mod file!!

tiguan
20th September, 2015, 05:02 PM
post mod file!!

original writing back also does not work
I want to make DPF in flash

CustomCars
20th September, 2015, 05:08 PM
Wrong file
Did u first read get from OBD ? And sure you don't use other file, and chks is correct ?

Something cheat us here... And no one change in file ?
Anyway in problematic adress you file was empty.

tiguan
20th September, 2015, 05:15 PM
Thank you for repley

yes
I first read OBD true, then read via tricor boot backed up
and tried to write this Mod fFle via boot.

CustomCars
20th September, 2015, 05:20 PM
Ok friend,
Find BDM 03L906022B 396484 dump, and that's one will update your ECU too.
(I have OBD version only)

tiguan
20th September, 2015, 05:22 PM
Thank you for repley

yes
I first read OBD true, then read via tricor boot backed up
and tried to write this Mod fFle via boot.

here original file read first time with OBD kessV2

HW:
SW: 1037396470
VIN nr.: WAUZZZ8K99A048706
SW ver.:
Spare:
Engine: R4 2,0L ED canopen - int flash
HW Ver.:
SW upg.: 03L906022JM 3173
Installation:

tiguan
20th September, 2015, 05:25 PM
This is Tricor EDC17 can I use BDM

CustomCars
20th September, 2015, 05:30 PM
BDM - i mean bench, boot mode. OBD dump don't help you in that case.
Listen me and put there intFlash 03L906022B 396484, can DPF off before writing and all will be fine, rly

tiguan
20th September, 2015, 05:34 PM
BDM - i mean bench, boot mode. OBD dump don't help you in that case.
Listen me and put there intFlash 03L906022B 396484, can DPF off before writing and all will be fine, rly

Thank you

I've seen enough file on the forum,
what do I need only flash or complete Read all

CustomCars
20th September, 2015, 05:39 PM
You needed full flash, modiffy and write.
Because your files try replace OTP. This is good protection, if you will find solution to skip OTP (one way possible). Your ECU will be not booting anyway :-) Think why.

CustomCars
20th September, 2015, 05:40 PM
Don't download and write any read all because you will replace eeprom content

Babos
20th September, 2015, 05:47 PM
Tiguan listen him!!!!!!!
He know about what talk!!!

tiguan
20th September, 2015, 05:47 PM
You needed full flash, modiffy and write.
Because your files try replace OTP. This is good protection, if you will find solution to skip OTP (one way possible). Your ECU will be not booting anyway :-) Think why.

hi friend thanks for you reply, and that you want to help my
can you please explain what you meant.
what I need is full flash (Flash + Eeprom) Ok
the software must be the same. on my ECU 2x numbers 03L906022JM and 03L906022B.

This file is OK, http://www.digital-kaos.co.uk/forums/showthread.php/424976-NEED-ORIG-FILE-AUDI-A4-2-0CR-EDC17CP14?p=2317758&viewfull=1#post2317758

proel
20th September, 2015, 05:59 PM
No. You need only to write flash (without eeprom) in boot mode.

CustomCars
20th September, 2015, 06:14 PM
In very shortage
You cant overwrite full flash by obd file where many data was replaced by empty space. Other way is modiffy read all or separate it.
Flash in ecu Allready have wrong data so no read it to modiffy

tiguan
22nd September, 2015, 06:28 PM
Solved thanks, CustomCars

adrianvick
23rd September, 2015, 11:39 AM
I have a question regarding tc1796.
My car is similar as in the topic.
Originally my car had ecu software 3xxxxx. (without tprot)
Then, a tuning company updated it with stock software via obd, and its now 5xxxxx. (without tprot)
So...for a software update or for and older software, do I need to write only obd flash, or full bootmode internal flash?
While OTP cannot be written by galletto, I have seen a few people upgrade their cars from 143hp software to 170hp software, after turbo upgrade.(two engines are same, only turbo is different).
Somebody said that to upgrade 143hp software to 170hp, only need to write full intflash in bootmode, and done. The two are perfectly compatible. (same ecu hardware = 03L906022B )

Question is? what software version is ok to write? (OTP problems? )