PDA

View Full Version : W211 220CDi EDC16 maps help



Fec001
20th September, 2015, 10:13 PM
Hi!
I found all main TLs, gear dependant TLs, DW, Nm to IQ and smoke limiters.. As I don't know MB EDC16 much, can you tell if any other map what can be limiting IQ/TL???

queroseno
20th September, 2015, 10:18 PM
edited by mistake, sorry

Fec001
21st September, 2015, 11:59 AM
865FE and D065E could be IQ limiter but X axis is unknown

bobolin4o
22nd September, 2015, 07:07 AM
How much IQ you want to achieve and how much is the IQ, that limiting you now?
If you want, send me a map pack with maps, that you are discovered till now...
Regards!

Fec001
22nd September, 2015, 07:51 AM
Here is the mappack!!! Thanks for help

bobolin4o
22nd September, 2015, 08:01 AM
You don't answer to my question...

wiski
22nd September, 2015, 08:10 AM
Quick ones .You need them also in parallel 86A50, 86BA4 , 86CFC , 96958 , CF96E , CFE76...

Fec001
22nd September, 2015, 08:37 AM
You don't answer to my question...
Sorry!!! :) max IQ what I want to achieve is about 92-94mg. I don't know what is the basic limit because didn't tried file on car just learning ECU SW

Fec001
22nd September, 2015, 08:48 AM
Quick ones .You need them also in parallel 86A50, 86BA4 , 86CFC , 96958 , CF96E , CFE76...

Thanks wiski!!
86A50 - Iq limiter by turbo press.???
86BA4 - whats are negative values?????
86CFC - ???????
96958 - another rail limiter
CF96E - IQ limiter based on some kind of temp.
CFE76 - IQ limiter another kind of temp.

bobolin4o
22nd September, 2015, 08:50 AM
So... you need in this case to tune:
Nm to IQ (don't touch The "X" axis!)
Smoke by MAP - yours maps and 86A50
TL in mg
gear dep. TL in Nm - for low gears, if you want...
Don't touch duration, DW and rail - there is no need...
And of course you need more boost...

Fec001
22nd September, 2015, 08:56 AM
So... you need in this case to tune:
Nm to IQ (don't touch The "X" axis!)
Smoke by MAP - yours maps and 86A50
TL in mg
gear dep. TL in Nm - for low gears, if you want...
Don't touch duration, DW and rail - there is no need...
And of course you need more boost...

Pretty easy ECU logic then. Thank you guys!!!!!
One more, then 865FE is IQ limiter too

wiski
22nd September, 2015, 09:09 AM
Thanks wiski!!
86A50 - Iq limiter by turbo press.???
86BA4 - whats are negative values?????
86CFC - ???????
96958 - another rail limiter
CF96E - IQ limiter based on some kind of temp.
CFE76 - IQ limiter another kind of temp.
86a50 86ba4 injection corrections.

Sent from my GT-I9100 using Tapatalk

bobolin4o
22nd September, 2015, 09:16 AM
Pretty easy ECU logic then. Thank you guys!!!!!
One more, then 865FE is IQ limiter too

But the logic of this map tells me to don't touch...

Fec001
22nd September, 2015, 09:17 AM
But the logic of this map tells me to don't touch...
You mean don't mod that map?? (865FE)

bobolin4o
22nd September, 2015, 09:21 AM
You mean don't mod that map?? (865FE)
Yes.
If the ""X" axis is MAP, with high boost you have low IQ... so this is not normal condition for limiting the IQ.

NASTASE
22nd September, 2015, 09:34 AM
865FE is not IQ limit, your fuel is limited on 100mg, so no need to find IQ limits if you want to inject 94-97mg Diesel.There are more maps for IQ limiter but all for 100mg.
One of them here,
332246

wiski
22nd September, 2015, 09:53 AM
And ofcourse for readers sake we are dealing with mm3 all the time ;)

Sent from my GT-I9100 using Tapatalk

NASTASE
22nd September, 2015, 04:15 PM
And ofcourse for readers sake we are dealing with mm3 all the time ;)

Sent from my GT-I9100 using Tapatalk

Right mate, my mistake, of course mm3 for this car.Mea culpa!!:tranquillity::tranquillity:

Fec001
22nd September, 2015, 04:45 PM
Thank you guys! Got very helpful infos!!!!!!!!