PDA

View Full Version : cas2 flash good needed



pbn
27th September, 2015, 05:05 PM
hello members
i need a good flash for cas2 9s12dg256, i have good eeprom, but flash no good!
i have tryed sw17, sw23, and sw30, but not working.
it das not match my eeprom!

pbn
27th September, 2015, 06:30 PM
THIS IS MY EEPROM, IF THAT HELPS!

bearheroes
27th September, 2015, 08:40 PM
What is the problem?

pbn
27th September, 2015, 09:02 PM
someone on a garage is replaced the airbag module on the car with a secont hand one.
after he started the car and parked it. half an hour later, customer go to pickup his car from garage, and car is dead.
the car comes to my shop after for programming. i read cas2 and checked dumps, and i can sea that flash its no good.
i tryed to bring it back to life with flash dumps from dk, but no lack.
i thing that the dumps mast be a pair. otherwise cas dont work.

pbn
27th September, 2015, 09:04 PM
when i use a pair from dk, the car is back to life, but i can not diagnose the cas. and as soon as i use the car key, the modul dies again.

pbn
27th September, 2015, 09:09 PM
this is my flash

pbn
27th September, 2015, 09:44 PM
SOLVED!!
I USED A GOOD PAIR OF DUMPS FROM DK.
I USED THE FLASH AS IT CAMS. NO MODIFICATIONS.
ON THE EEPROM I COPY MY EEPROM FROM ADDRESS 000 AN TIL 7AF. THE REST I LEFT THE DUMP FROM THE PAIR.
THE CAR STARTED WITH NO NEED OF SYNCHRO ELV, AND NO NEED CODING.

ITS TAKEN ME 2 DAYS OF HARD WORK TO START THIS CAR,
AND I HOPE MY INFORMATION WILL HELP OTHER PEOPLE ON THIS FORUM!