CAS3 0L01Y 320d 2007 problems!

[snowerf1]

Hi guys, yesterday i worked with a bmw 320d 2007 with cas3 hw: c3 sw: 09.3 diag:06 index: 06A0 61.35-6943814-01
everything went good , drove home with car and noticed the remotes of car didnt work when tried to lock/unlock, i washed the car after i did the dash/cas and thought maybe there was water in the antenna amplifier, but opened it up and looks good, ...could it be thew flah that has gone bad??...and does anybody have a good working flash, tried to search here but all flashes seems different..i read/write with r270 china..(BIN)
thx

[snowerf1]

333135333136
Flash file + Eeprom

[snowerf1]

i also noticed that i had 450 celsius on the soldering iron :goodnight:, could i have damaged som capacitor(s)

[snowerf1]

I have now bought a used Cas3 with same numbers as mine(exact the same)..swapped the processor..still same problem..so think the eeprom is damaged..anyone can inspect eeprom and see if there is something strange in it?

[elcarpuz]

hi, i have same problem, i test to read 0l01y mask 320d cas black with red rosfar but say "still secured", i read on all forum 0l01y is difficult to read/write can dead

[PETAR]

my red r260 too not work on this mask 0101m
i try 6-7 time read this mcu but noting

[aem]

blue plastick box r270 work perfect on 0L01Y

[drpeter]

my red r260 too not work on this mask 0101m
i try 6-7 time read this mcu but noting
If you use the x12 cas schematic for the red rosfar then problem solved.