2015 NISSAN VERSA CRAS CLEAR HELP. 98820 9KE0A

[carber78]

hello friends, today I'm working on a 2015 Nissan versa with a 99820 9KE0A
eprom 95128
I tried clearing it with Tachosoft online and it's a no go. scanner won't communicate with airbag after installing cleared dump.
maybe some one can help me clear the dump for me. thanks in advance..

[carber78]

Here is the .iso cleared from ~~~~~~~~~~~~~~~

[carber78]

Before it would have trouble code B1239 Crnt Control Module :subdued::05.18-flustered:

[credoline]

Hello San Antonio, try it, report it.

[carber78]

Thank you credoline. but for some reason it's still the same. air bag light stays on, after I scan the air bag control module it says internal control module then locks up. won't let me read the air bag module after. any ideas?
:apologetic:

[mkopytekchi89]

write original crash data back to module and try to communicate with module. See if it will communicate and not lock up with original dump on it.

[carber78]

yeah! I tried that. and I can communicate but it gives me the b1239 code

[FxShaw]

Try this ....

[carber78]

Thank you all very much for helping me out. I tried flashing original file back and module locked up. it said b1239 control module then would lock up. and would not communicate, I tried different files from here and I guess somewhere down the line the module messed up somehow maybe by trying to read in circuit. I was able to get a used one from scrap yard from a 2014 Nissan versa with a different number but same eprom 95128 tried reading data and saving and after I wrote the data from the other one put in in old module and same problem. I took of eprom back out and put it in good used unit I had acquired and cleared dump from scrapyard and flashed eprom again, installed in vehicle and it worked hope I have no problems. the used replacement module looked identical was a bosch 95128 98820_9ka0a I guess they are interchangeable.
I want to thank you all for your help, " Credoline,mkopytekchi89 and FxShaw." . This thread is now closed...

[FxShaw]

Ty for the feedback.

[lexidime]

what's the password?

[lexidime]

I opened the file and it's all 3d 3d 3d 3d 3d... because he forced opened it without a password it through out trash instead of hex code

[autorebuilder]

You need a virgin file to load and you can fix this.