honda accord 2015 crash

[bassam]

hello everyone how are you?

srs unit model : 77960-T2A-A013-M4
cpu: SPC560P50

need clean file. and thanks in advance
333966

[auto80]

------------------

[auto80]

The following errors occurred with your submission

bassam has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

[bassam]

thanks please send pass now.

[auto80]

check now pm

[bassam]

not work internal fault u3000 :(

[bassam]

anyone can help me ?

[zckariya70]

anyone can help me ?


Bassam some times without crash the light will glow for this case if u clear the crash data and if u fix in the car the light will off and come back in some second so this is advised to change the module then only it will work

[bassam]

WE HAVE CRASH DATA IN THE MODULE AND I CHANGE DRIVER AIRBAG IN THE CAR WE HAVE PROBLEM IN THE DUMP I NEED CLEAR DUMP

[PremierD]

You need to take of your CAPS LOCK mate :)

[zckariya70]

WE HAVE CRASH DATA IN THE MODULE AND I CHANGE DRIVER AIRBAG IN THE CAR WE HAVE PROBLEM IN THE DUMP I NEED CLEAR DUMP
Best of luck

[bassam]

lol ok thanks guys but i still need help :(

[sawatdee0999]

okay, i'll work on it today. first off, i need to start by what programmer did you use.

[bassam]

thank you my friend and the programmer is car pro tool

[sawatdee0999]

334103


test it and report, use same programmer to program it back.

[bassam]

ok thank you so much i will report

[FxShaw]

If you getting that code then data flash is most likely not going to help you..you better off with a full flash. I had one of these before and I think it was an hardware issue...cant recall for sure.

[bassam]

not work internal fault of srs unit :(

[bassam]

full flash

[bassam]

when i read fault codes for the first time, about 22 code shows up but then when i clear 2 codes remains.. internal failure of the srs unit

[FxShaw]

You will need to find some one with a full flash file for carprotool format... get the data flash clear and then try it.

[sawatdee0999]

it could be hardware issue.

[zend]

Yes, it could.

[bassam]

any one have full flash clear dump

[bassam]

any one can help me ????

[bassam]

full flash ?

[FxShaw]

Contact the guys for the tool u have..they should be able to help u.

[auto80]

--------------

[bassam]

Try again n report

not working when i clear dtc the airbag light turn off and stays off until i turn ignition off when i turn ignition on and read dtc show me internal failure and when i remove any airbag plug they show me internal failure and airbag plugxxxx so please i need help :(

[bassam]

i think that i need full flash clear dump

[bassam]

if i put this clear one 77960 T2A A020 M4, full flash SPC56P50 they will work or not ?

[zckariya70]

if i put this clear one 77960 T2A A020 M4, full flash SPC56P50 they will work or not ?

Same as i told u before u cant rectify the same module , u need to change it

[bassam]

all modules like this ? or only my module ? if i buy new one virgin and read it full flash i cant repair the old module ? by write full flash ?

[bassam]

guys can some one help me

[AUTODIAGNOZA]

Mate, just buy a new unit and it is solved.. Probably old unit's hardware it's gone. I don't think a full software will solve the internal fault problem.