Citroen C4 BSI Johnson Control needs flash

[antlio]

Hi

I have a bsi from C4 model 2008 Johnson Control with following caracteristics
96 640 591 8001
BSI04EV K05-00
041008
BOOT 28120836-4
HARD 28119249-6D
V05.01
281201948D
My problem is that the flash is in boot mode after read pin with FVDI and nothing works after ignition is on . I look for ori flash without boot with same caracteristics to write in the BSI or repair my boot flash .

[baltazar3]

You have to try reprogrmm BSI with Lexia-PP2000.

[lupu_sandu]

Lexia will not reprogram BSI when in boot.
antlio (http://www.digital-kaos.co.uk/forums/member.php/88388-antlio): Search on forum. There are plenty BSI dumps

[antlio]

I had search but i can t find flash like mine . I have from 308 good flash but has a small difference at sw . 308 is 96 640 591 8002 and C4 is 96 640 591 8001 and when i tried to write message is chm error .

[Siham]

What fvdi you have clone or ''or''i from fly ?
have you try to restart procedure with battery booster?
Try to make it on bench ,pinnout is here on DK .
Before doing it have you outed car in showrom mode and unpluged fuse???
Never get problem with mine over today ,but better way is to make it on bench. :)
Search here on dk you will find the pinout.
In attach a file that helped me to repair one bsi JC from C4 ,its not from me i got it from another place and i keep it on my database.
Pass in our PM.

Good luck and give report please :) !

[antlio]

Hi

I tried first your file but message is chm error. After that i tried 6 other files with same message and the seventh file was correct . Abritus started to write the flash and after 5 min procedure complete . I programmed again pin code and i did telecoding . Finally the car worked ok . after all i compared my boot mode file with others and i saw that there was areas with FF and 00 in different devices . So i believe that first file and other 6 files were ok but not for this version of bsi . Thanks all of yours for help .

[Siham]

Hi

I tried first your file but message is chm error. After that i tried 6 other files with same message and the seventh file was correct . Abritus started to write the flash and after 5 min procedure complete . I programmed again pin code and i did telecoding . Finally the car worked ok . after all i compared my boot mode file with others and i saw that there was areas with FF and 00 in different devices . So i believe that first file and other 6 files were ok but not for this version of bsi . Thanks all of yours for help .

Kindly can you share your file that worked just than i can made some comparison? Would be great ! :)
You used FVDI or original AVDI to write it?
Thank you for your report and happy that you solved your problem.

Regards!

[tech_cz]

Just for information.
Maybe Lexia can not repair BSI in boot mode but Peugeot Planet can.
I did it twice.

WBR, Marek

[ghost9800]

solved or not ?
if you need it, i will send it but witch version of fvdi or avdi have ????

[marianol86]

What fvdi you have clone or ''or''i from fly ?
have you try to restart procedure with battery booster?
Try to make it on bench ,pinnout is here on DK .
Before doing it have you outed car in showrom mode and unpluged fuse???
Never get problem with mine over today ,but better way is to make it on bench. :)
Search here on dk you will find the pinout.
In attach a file that helped me to repair one bsi JC from C4 ,its not from me i got it from another place and i keep it on my database.
Pass in our PM.

Good luck and give report please :) !

Hello. Can you give me pass please? I have te same problem...

Thanks

[rolandas]

plese pass :tears_of_joy:

[TRANS593]

Hello
I am looking for a flash bsi jc c4 grand picasso 1.6HDI 110CV 2009 following a problem of reading with fvda to program a 2nd key unfortunately the bsi is blocked nothing that displays
thank you in advance .96 640 590 80 02BSI04EV K04-00 180809BOOT 28120836-4HARD 281192483C thank you in advance .

[doctore]

Hello
I am looking for a flash bsi jc c4 grand picasso 1.6HDI 110CV 2009 following a problem of reading with fvda to program a 2nd key unfortunately the bsi is blocked nothing that displays
thank you in advance .96 640 590 80 02BSI04EV K04-00 180809BOOT 28120836-4HARD 281192483C thank you in advance .




You are live mate where you by 3 years :biggrin:

no help for you:rangers2: