PDA

View Full Version : Alfa 147 help with curtain resistance



PSAcars
7th October, 2015, 05:56 PM
Alfa 147 help with curtain resistance. I need to put a resistor to test module. Car is not with me.

Tuiken
7th October, 2015, 06:18 PM
Alfa 147 help with curtain resistance. I need to put a resistor to test module. Car is not with me.

Hello i dont understand your problem


If help press thanks

PSAcars
7th October, 2015, 06:25 PM
What is the resistance of the airbag curtain igniter ?

Tuiken
7th October, 2015, 06:29 PM
2 ohm i think


If help press thanks

PSAcars
7th October, 2015, 07:36 PM
will try thank you

vlaki electric
7th October, 2015, 07:40 PM
The bes resistant is 2,5 or 2,7 ohm

redtop
9th October, 2015, 08:58 AM
For airbags in earlier Alfa Romeos the ECU consider the airbag defective if the resistance is lower than 0,1 ohm or higher than 5.6 ohm.
I've successfully used 3.3 ohm resistors as dummys for testing.

PSAcars
15th October, 2015, 05:26 PM
Hi back again tested with 2.2 , 2.5 , 3 ohm ok, higher than that and gives error