Focus edc16c34 0281015607 1039S10485 write problem

[illestibor]

Hello.have a problem with this ecu.i cab read but i can't write back a modified content.like a write protection.
But this ecu is edc16c34. 0281015607
It's true that ecu was from 2010 year.It is here some trick to write the ecu?A boot pin?Can somebody help me?
Thanks.Here is some photo from this ecu.334979334980

[juanluis]

buenas por qe no hay escrives y lees por BDM es lo mejor y seguro ,

[Johnner]

Juanluis,please repost in English !

[centrohifi]

protection !! friend is a normal edc16! check connections !!

[illestibor]

but here is an other type of mcu.not mpc56.
There is sc66703 from freescale.So nobody have this problem.The bdm read write not possible.With bdm100 this type of cpu is not supported.Cannot read write flash.
From obd2 i can read the content, but can't write back anything modified content.Only the original.Write stops at 84% with an error, where is the modification.
So nobody have this type of issue?

[J_amb_o]

It is BDM only, you can read OBD but cannot write on a 2010.

Genuine BDM needed. clone not work.

[ominimicu]

Try Ktag!!!

[carmageddon]

but here is an other type of mcu.not mpc56.
There is sc66703 from freescale.So nobody have this problem.The bdm read write not possible.With bdm100 this type of cpu is not supported.Cannot read write flash.
From obd2 i can read the content, but can't write back anything modified content.Only the original.Write stops at 84% with an error, where is the modification.
So nobody have this type of issue?

mpc and sc are same processor, change only productor!

you can read-write without problem also with fg v48

http://s7.postimg.org/djjhrbhtj/WP_000186.jpg (http://postimg.org/image/djjhrbhtj/)

[illestibor]

Ok.So i'll try it.But have only v54 or kessV2.Hope i can do with this tools.

[carmageddon]

BDM = fgtech

kess is only for obd-boot

[icezero2010]

you can disable the immo and you can write with direct connection . to write this ecu u need the immo on car .

[carmageddon]

i do this ecu always with fgtech in bdm, i wrote edc16c34 psa and ford also by obd without problem always with fgtech...is not necessary disable immo or make other actions, only read and write obd or bdm...obviously with upgraded tool is better!

[jjscalak]

Hello.
Have someone full BDM reading from this 9CWF ecu ?
I need also for 9CWE ... if have someone...

[GolfmkI]

You can read write BDM with no problem

If your BDM100 is clone or tool old you can read write also but no way to read FLASH/EEP/MPC

Only can read FULL BDM and write also.
You Know it because when BDM load it says ecu not recognized, choose from the list.

You can do a trick fro simply write flash.....As you Know in advanced menu when you read FULL BDM you can "cut " full bdm file into its 3 different files. Of course you can also join it.

This way you can write many ecus not recognized by BDM but perfectly writen.

But sure Gallv54 can write without any problem with all recognised ok.

[jjscalak]

i have good tool for write.
I need only have data to write.
Have someone bdm reading ?

[rh03]

I readed and writed easy this ecu on bdm and obd, with ktag and kess.

[jjscalak]

have you ori data from this ecu then ?
I need flash and eeprom, because data in my ecu is broken...
i need to reprogram ecu, and make coding in car

[GolfmkI]

have you ori data from this ecu then ?
I need flash and eeprom, because data in my ecu is broken...
i need to reprogram ecu, and make coding in car


Simply need other Ecu
Or you can reflash whole ecu again
As this ecu (Ford) store keys you need to do adaptation.
Very easy with Focom or Ford specific tool.
But youll probably need 2 physical keys to reprogramm.

[GolfmkI]

Here you have
Only flash , dont have eeprom
Hope yours is ok

orginal dump full BDM 1.6 66kw 9M51-12A650-AF 9CWF 0281015607

[carmageddon]

have you ori data from this ecu then ?
I need flash and eeprom, because data in my ecu is broken...
i need to reprogram ecu, and make coding in car

if you need useful help start to describe what is your problem and what you need

[jjscalak]

I need to have complete bdm readings from ecu like this one.
I need to have flash and eeprom data, from ecu 9CWF, or 9CWE.
Its necessary to reprogram this ecu.
Thats all what i need.


Sent from my iPhone using Tapatalk Pro

[carmageddon]

I need to have complete bdm readings from ecu like this one.
I need to have flash and eeprom data, from ecu 9CWF, or 9CWE.
Its necessary to reprogram this ecu.
Thats all what i need.

Sent from my iPhone using Tapatalk Pro


i work in ford and i never need e2p and flash when i need to change ecu with one used!

[jjscalak]

Ok. So then...
Can you check in database in Ford,
About number of ecu ( PCM ) what should be in Ford Focus 1.6 2009 - with vin nr.

WF0SXXGCDS9K13442

I think about bosch number and sw number.

[carmageddon]

ecat give me this code for the ecu 9U51-12B650-BB, but is not what you find on the label, is only catalog part for order

for this code is available 0281015607 and 0281015608, the sw is indifferent because you can charge the right version only by ids during setup

[jjscalak]

Ok... so now i got new other info from you ...:)
Some other guy told me, at on this ford should be sw nr. 9U71-12A650-BB , 0 281 016 536
I tryed to change ecu sw on this, but ids do not shows sw like this..

On label of ecu in this car i have :
9M51-12A650-BB , 0 281 015 607.
And i have all the time problem with fuel pressure sensor. P0193, P0698
Sensor is new. Cables between ECU and sensor are checked..

But...
Ecu was changed. Someone before me did it.
Ecu was opened... and maybe someone changed something... i am not sure... that is why i looking for ori full data.
I do not remember now what sw is in the driver, i need to back with ecu and check...

You sad.. it should be:

9U51-12A650-BB.

Then i try to change it with ids then...
Hw nr seems to be ok..
So maybe finally i can done with this car...






Sent from my iPhone using Tapatalk Pro

[carmageddon]

sorry....i wrote bad...the right code are : 9U71-12A650-BB

HW bosch number : 0281016536

1EKB



https://i.postimg.cc/230vQBpQ/focus1.png (https://postimg.cc/230vQBpQ)


https://i.postimg.cc/TychTZfV/focus2.png (https://postimg.cc/TychTZfV)

[jjscalak]

So i need to change ecu....


Sent from my iPhone using Tapatalk Pro