BMW E60 530D 2004 milage in ecu

[Speedofix]

Milage in flash or just eeprom ?

[Fec001]

BMW EDC16 km/mls data are in eprom

[Speedofix]

I have try With NYO04 change milage put it back in car. read old milage.

[Fec001]

What diag tool do you use for reading?

[Speedofix]

I have read it With Kess v2.

Also read eeprom With reader

[Fec001]

I mean, what tool did you use to check your km mod is correct? with diag shows the old km:?

[neuro]

You can check mileage with FVDI / SVDI and genuine AVDI :) under calibration option, it reads mileage in all modules which store mileage and are present in car. BMW explorer can do it as well.
There must be some other tools which are able to retrieve kms from ecu.

[Speedofix]

I read it with autocom. Yes it show still old milage if i make a new fault.

Sent fra min SM-G900F via Tapatalk

[Fec001]

your only problem if you trigger a dtc in ECU then, it shows old km in freeze frame data? If yes, drive the car 20-30km. I tought you see old "main" milage in ECU like VAG EDC15-16 with VCDS. I think only BMW explorer can do that (reading main mileage from ECU).

off topic for AVDI users:

AVDI read it under calibrations menu but if you change mileage only in kombi and CAS, DME/DDE wil show new value. BUT if you open ECU, read eprom and check with calculator, old mileage will still there.

[Speedofix]

Mod file with nyo04. Drive 50km take off contact for railpressure and still orginal milage in faultcode

Sent fra min SM-G900F via Tapatalk