PDA

View Full Version : KESS ON TRUCKS



LECBA17
9th October, 2015, 10:48 PM
HELLO, I bought a KESS V2 CLONE, runs on cars and motorcycles, but the protocols are disabled TRUCK. LISTEN TO BE CHANGING NXP and change the firmware to operate in trucks. Could anyone help?

I LEAVE MY DATA KESS.

FW version: 4.036
Serial number: K10033818
Customer Code: C7514
Group Code: C7514


THANKS.

dominik.m
9th October, 2015, 11:00 PM
after five years 7 posts.

Buy orginal.

teamtuner
10th October, 2015, 10:49 PM
HELLO, I bought a KESS V2 CLONE, runs on cars and motorcycles, but the protocols are disabled TRUCK. LISTEN TO BE CHANGING NXP and change the firmware to operate in trucks. Could anyone help?

I LEAVE MY DATA KESS.

FW version: 4.036
Serial number: K10033818
Customer Code: C7514
Group Code: C7514


THANKS.
from this firmware version,you can"t update to trucks versions...you need 3.099 fw...

LECBA17
13th October, 2015, 05:26 PM
how to change the firmware to 3,099 ?

teamtuner
13th October, 2015, 06:49 PM
how to change the firmware to 3,099 ?
new nxp LPC2478....

ominimicu
13th October, 2015, 07:48 PM
U need new NXp, new serial and new update with trucks.
also your china PCB must be preapred to handle the 24v

teamtuner
13th October, 2015, 09:20 PM
U need new NXp, new serial and new update with trucks.
also your china PCB must be preapred to handle the 24v
best solution...EU clone or original

LECBA17
15th October, 2015, 12:27 AM
someone has 3,099 firmware ? I can load it with j -link in my NXP ? or if or if I have to change the NXP ?

teamtuner
15th October, 2015, 06:07 AM
someone has 3,099 firmware ? I can load it with j -link in my NXP ? or if or if I have to change the NXP ?
three times we said to you...YES...YOU MUST TO CHANGE THE NXP

LECBA17
15th October, 2015, 05:39 PM
OK thanks. and where I can get 3,099 fw?

bobolin4o
15th October, 2015, 07:07 PM
On the flea market...
Now seriously, dude, don't be so lazy, here in the forum you can find all that you need...
Just use the search, no need to create your own thread.
Regards!

austingreen
27th October, 2015, 04:55 AM
OK thanks. and where I can get 3,099 fw?
PM sent to you, please check!

kikichou
27th October, 2015, 10:42 AM
HELLO, I bought a KESS V2 CLONE, runs on cars and motorcycles, but the protocols are disabled TRUCK. LISTEN TO BE CHANGING NXP and change the firmware to operate in trucks. Could anyone help?

I LEAVE MY DATA KESS.

FW version: 4.036
Serial number: K10033818
Customer Code: C7514
Group Code: C7514


THANKS.

hi, LECBA17. sorry to tell you that China clones do not support truck actually. if you use it on truck, you are at risk getting the hardware burned.
only if your truck get authorization and the device light up, (that is your truck and device get authorization) then you will have an opportunity to diagnose truck.

but i recommend to try NEXIQ scanner, a professional truck diagnostic tool. (http://www.wobd2.com/wholesale/nexiq-125032-usb-link-software-diesel-truck-interface-and-software-with-all-installers-3111.html)