View Full Version : RADIO CODE BECKER BE 2580
johny240
12th October, 2015, 09:57 PM
Hello
Can you help me generate code to radio navi. If somebody have martech can do this.
TYPE: IDIS
SERIAL: LA2140006218/01
335596
clydey
13th October, 2015, 07:11 AM
try
navi 3167
radio 0851
watch out for visa versa cheers
johny240
14th October, 2015, 11:05 AM
wrong code :(
clydey
14th October, 2015, 11:06 AM
codes as they left the factory cheers
johny240
14th October, 2015, 11:49 AM
thx clydey for the help
it is possible that someone changed the memory dump in 29f800 ? if i will read dump it`s ability extract codes?
clydey
14th October, 2015, 11:50 AM
I can read dumps cheers if you upload
clydey
14th October, 2015, 11:54 AM
have you tried visa versa ie radio code in navi and navi code in radio cheers
johny240
14th October, 2015, 11:58 AM
yes i tried visa versa this codes and 60 min lock
clydey
14th October, 2015, 12:01 PM
cheers....
shooting
14th October, 2015, 12:02 PM
thx clydey for the help
it is possible that someone changed the memory dump in 29f800 ? if i will read dump it`s ability extract codes?
Read flash memory 29F800 TSOP48
Code is stored in memory with "normal pinout"
Error counter is stored in memory with "reverse pinout"
Read and post ;)
wbr
johny240
14th October, 2015, 02:15 PM
inside flash m27c512 and eeprom 24lc04 wich dump read?335984
clydey
14th October, 2015, 02:28 PM
according to martech on line help there are two chips photographed
markings on photograph are am 29f800bb
70e1
0019fba jj
----------------------
the other is 70f1
0019fba jj
one is normal one is reversed pins wise
it also says if you want to change code in flash then read/write normal flash chip
hope this helps as I have never done one
maybe another poster has ?
shooting
14th October, 2015, 04:56 PM
inside flash m27c512 and eeprom 24lc04 wich dump read?335984
This is the Becker, read the Flash from the lower unit ;)
wbr
johny240
26th October, 2015, 09:07 PM
Hello again
yes you are right flash AM29F800BB are in siemens module one is normal second is reverse.I read normal please take me code. Someone reprogram it and factory codes didnt work.
I read flash nr 1 on picture338017
clydey
26th October, 2015, 10:25 PM
johny240 your dump is coming up code not found cheers
shooting
26th October, 2015, 10:31 PM
Hello again
yes you are right flash AM29F800BB are in siemens module one is normal second is reverse.I read normal please take me code. Someone reprogram it and factory codes didnt work.
I read flash nr 1 on picture338017
Sending you a solution in PM
wbr
clydey
27th October, 2015, 01:28 AM
can I ask what programmer you read with
according to martech beeprog and vellon can read these cheers
johny240
27th October, 2015, 04:29 PM
HI
i read this flash beeprog+ with TSOP 48
johny240
31st October, 2015, 02:01 AM
BIG THX FOR SHOOTING PERFECT SOLUTION WORKS 100%. PROBLEM SOLVED
goosebartek
3rd August, 2019, 02:46 PM
Hello again
yes you are right flash AM29F800BB are in siemens module one is normal second is reverse.I read normal please take me code. Someone reprogram it and factory codes didnt work.
I read flash nr 1 on picture338017
Hi
You read reverse ?
Juddder
13th October, 2019, 01:45 PM
Hello again
yes you are right flash AM29F800BB are in siemens module one is normal second is reverse.I read normal
To read the AM29F800BB with a TSOP48 adapter did you do this with the chip still on the board or did you remove it first?
I have the same unit and trying to work out how to read it with either my MCUMall GQ-4X or my MiniPro
rob h
15th May, 2024, 08:34 AM
I read the lower 29F800bb , using tl866? The upper is reversed, i could not read that one.
1026609i guess, the lower, with correct pinout, is the one to read.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.