PDA

View Full Version : Audi A6 3.0 TDI EDC16CP34 DPF off



Fec001
14th October, 2015, 04:12 PM
Hi!
Is the 1D173C the correct address for DPF switch?

CustomCars
14th October, 2015, 04:19 PM
You're in :-)

Fec001
14th October, 2015, 04:35 PM
Not work.
DTC U0301 Software error

nikobg
14th October, 2015, 04:41 PM
unplug diff presure and temp sensor

CustomCars
14th October, 2015, 05:14 PM
Solution work, but like nibg say needed unplug sensor..
or use other more advance solution ;) But there is much more work to do.

Fec001
14th October, 2015, 05:17 PM
Unplugged diff press. sensor and DPF temp sensor. One of the U0301 DTC gone but still 1 another U0301 there. If disconnect EGR temp sensor then, the other U0103 gone too but comes P0544 "G235 sensor" error :S

motorsportsz
14th October, 2015, 05:38 PM
Unplugged diff press. sensor and DPF temp sensor. One of the U0301 DTC gone but still 1 another U0301 there. If disconnect EGR temp sensor then, the other U0103 gone too but comes P0544 "G235 sensor" error :S


pass in pm

Fec001
14th October, 2015, 06:22 PM
Still one U0301 "Software Incompatibility with ECU" DTC

nikobg
14th October, 2015, 06:29 PM
unplug all 3 sensor on dpf and swolt be ok

motorsportsz
14th October, 2015, 06:49 PM
try again mate
post updated

Fec001
15th October, 2015, 07:21 AM
unplug all 3 sensor on dpf and swolt be ok

you mean:
1: DPF Diff. press. sensor
2: DPF temperature sensor
3: EGR temp sensor???????

Fec001
15th October, 2015, 11:45 AM
try again mate
post updated

Works perfect, Thank you!!!!!

nikobg
15th October, 2015, 03:44 PM
unplug sensor ?

CustomCars
15th October, 2015, 03:50 PM
I think more advance solution, without LIMP and without unplug sensors.

Pls check measure from you EGT sensor on turbo ;-)

kaross
15th October, 2015, 04:24 PM
No need to touch LIMP mode, no need to touch sensor.
My file will work 100%. Pass on PM.
3 bits.

336185

motorsportsz
15th October, 2015, 06:54 PM
I have already solve this for fec001. Free of charge of course

CustomCars
16th October, 2015, 12:58 AM
kaross let me check your solution i make much more changes. What's signal your touched ?

Fec001
16th October, 2015, 06:31 PM
unplug sensor ?

No sesnors unplugged

king kong
11th November, 2017, 04:07 PM
pass in pm
I have same problem...same car same sw number ... can I have pass ?

Fec001
13th November, 2017, 04:31 PM
Just unplug:
-Differential press. sensor.
-Temp. sensor after KAT
-Temp. sensor before DPF
and you will have working solution with switch

sinsetsin
10th October, 2019, 05:16 AM
Please can you help me with dpf off?
Audi
SW: 1037391845
Engine: 3.0L V6TDI
HW Ver.:
SW upg.: 4F9910401L 0020
Thank you in advance.

a500tut
10th October, 2019, 09:00 AM
Please can you help me with dpf off?
Audi
SW: 1037391845
Engine: 3.0L V6TDI
HW Ver.:
SW upg.: 4F9910401L 0020
Thank you in advance.

Thanks and try.

sinsetsin
11th October, 2019, 05:31 PM
Thank you.

Kayhan 17#
19th June, 2020, 10:01 AM
Does anyone still have the solution to delete without DTCs and disconnecting of sensors?
Thanks

nerko 82
13th June, 2022, 09:21 AM
No need to touch LIMP mode, no need to touch sensor.
My file will work 100%. Pass on PM.
3 bits.

336185
please pass i have that a6 30tdi allroad but have limp mode with turbo actuator dtc all sensor for dpf its unplug