PDA

View Full Version : Ktag blocked after update



mecano_diag
16th October, 2015, 01:44 PM
hello
I have kTAG china clone ,V2.11 fw5.01,
I did update with JLINK for NXP , at first it worked well.After
i forgot to cut internet, it is now blocked all the icons are gray, and now NXP does not want to communicate with JLINK, even with 2.08 version does not work, y'as there a solution without replacing NXP ?

teerak2uk
16th October, 2015, 01:45 PM
Need to replace nxp what's your location

mecano_diag
16th October, 2015, 02:44 PM
I programmed once, a simple update blocks the normal?

ecutuners
17th October, 2015, 08:04 AM
Nxp doesn't need replacing, c5555 fix takes 2 minutes, if fw showed 6.071 then it would need replaced. Next time stay offline

teamtuner
17th October, 2015, 10:31 PM
hello
I have kTAG china clone ,V2.11 fw5.01,
I did update with JLINK for NXP , at first it worked well.After
i forgot to cut internet, it is now blocked all the icons are gray, and now NXP does not want to communicate with JLINK, even with 2.08 version does not work, y'as there a solution without replacing NXP ?




mate...change sd card with a new one of 2 gbyte
do it again the update with ksuite
will give again the good client code ...and if will have grey protocols,repeat same update...and don"t forghet to use thanks ...ahahah

mecano_diag
17th October, 2015, 11:25 PM
mate...change sd card with a new one of 2 gbyte
do it again the update with ksuite
will give again the good client code ...and if will have grey protocols,repeat same update...and don"t forghet to use thanks ...ahahah

Same problem ,nothing will have changed

teamtuner
18th October, 2015, 08:05 AM
Same problem ,nothing will have changed
your problem can be solved OK....new sdcard with 2gb....bin file for sdcard+rawcopy+again update 6.070 on ksuite

mecano_diag
18th October, 2015, 04:00 PM
Problem solved ,thanks for teamtuner

kohli
18th October, 2015, 05:55 PM
no inernet with china ...

teamtuner
18th October, 2015, 08:49 PM
no inernet with china ...
great mate...pfff...good solution-thatnk you

valdirld
2nd February, 2016, 01:02 AM
i have the same problem, C5555 gray by internet, i try original sd, not work, j-link no conection, can you help me for a solution?
thanks


your problem can be solved OK....new sdcard with 2gb....bin file for sdcard+rawcopy+again update 6.070 on ksuite

teamtuner
2nd February, 2016, 08:05 AM
i have the same problem, C5555 gray by internet, i try original sd, not work, j-link no conection, can you help me for a solution?
thanks
post image with printscreen of ksuite info...fw version,client code...etc

CustomCars
2nd February, 2016, 09:51 AM
i have the same problem, C5555 gray by internet, i try original sd, not work, j-link no conection, can you help me for a solution?
thanks

J-link will be not work. Orginal SD will be not work. Try what teamtuner say ! Don't make any shortage to this procedure and you will not find different way to make it/

valdirld
3rd February, 2016, 01:34 AM
here print

morgano
3rd February, 2016, 09:17 AM
If jlink does not connect you will need to change nxp.

valdirld
3rd February, 2016, 05:29 PM
no conection by jlink

CustomCars
4th February, 2016, 11:16 AM
They no needed change NXP because have older version, and best way is make update by new SD card + software preparation.
All was writen in this thread already.

morgano
4th February, 2016, 01:26 PM
They no needed change NXP because have older version, and best way is make update by new SD card + software preparation.
All was writen in this thread already.

Brother, recheck his info, he need fresh new NXP if he cannot connect to the one fit right now, his serial is ~~~~.

valdirld
4th February, 2016, 02:12 PM
They no needed change NXP because have older version, and best way is make update by new SD card + software preparation.
All was writen in this thread already.

friend, i know this way to update with firmware 6.07, but with old firmware i not know this metod, can you pm me more info?
thanks

morgano
4th February, 2016, 04:17 PM
Can you read? No other way for you now if you cannot enter BSL or connect with jlink. Just fit virgin NXP or play the toast game with it.

valdirld
4th February, 2016, 05:00 PM
ok, game ower, now buy new nxp

fronzethenight
3rd August, 2016, 12:35 AM
your problem can be solved OK....new sdcard with 2gb....bin file for sdcard+rawcopy+again update 6.070 on ksuite

It work with me!!

after first update with jlink 5.001 to 6.070 all work ok... after 30 uses, ktag blocked...

after hundred attempts nothing work... only teamtuner method!

thanks

bochen
13th August, 2016, 06:33 AM
Hi, can someone help me with my problem after upadate to 6.070? I updated to 6.070, no internet. Now I have info as on screenshot. Cannot select anything. I used different methods for recovey with old and new SD card and nothing workded for me.

teamtuner
13th August, 2016, 04:33 PM
Hi, can someone help me with my problem after upadate to 6.070? I updated to 6.070, no internet. Now I have info as on screenshot. Cannot select anything. I used different methods for recovey with old and new SD card and nothing workded for me.
i can help you outside forum and by teamwiever...need new sdcard 2 or 4 gb not formated...i said-NEW sdcard

bochen
13th August, 2016, 08:32 PM
i can help you outside forum and by teamwiever...need new sdcard 2 or 4 gb not formated...i said-NEW sdcard
ok, I have a new one. let me know by pm when you are ready.

boobcat
21st August, 2016, 09:56 PM
Hello, can help me with my problem after upadate to 6.070? I updated to 6.070, no internet,but not open car list.393544

smirnoff_rules
21st August, 2016, 10:13 PM
can you see your device in pc device manager

boobcat
22nd August, 2016, 04:23 AM
yes,device is connected393562

teamtuner
22nd August, 2016, 08:38 PM
yes,device is connected393562
please tell us how you have done update...from start to the end...
after that,will see if we can help you

boobcat
24th August, 2016, 02:56 AM
Till this i have 5. version,i opened software 2.08 and device it update to 6.0.but not open car list,sd card i not touch

teamtuner
24th August, 2016, 06:25 AM
Till this i have 5. version,i opened software 2.08 and device it update to 6.0.but not open car list,sd card i not touch
WRONG mate...from fw 5.001 you need first reflash NXP with the 6.070 fw...only after reflash is ok done,you can run update with the 2.08 sw that have the update folder full with families...in your case,the tool is blocked...need to change NXP...sorry for bad news

arjani
23rd November, 2016, 10:32 PM
Can you help me how i can update the keytag i have same error too.Thanks

i can help you outside forum and by teamwiever...need new sdcard 2 or 4 gb not formated...i said-NEW sdcard

teamtuner
23rd November, 2016, 11:37 PM
Can you help me how i can update the keytag i have same error too.Thanks
yes..........

markpowell35
28th November, 2016, 07:45 PM
yes..........

Can you please help me too :) lol,

i am buying new sd card tomorrow, 4gb as cannot get 2gb now.

if you can help on teamviewer will you PM me.

Many thanks.

mecsoun
26th January, 2017, 03:00 PM
Hello, i have problem with ktag 2.13 6.070, i have codes c5555 and ktag is without functions. I cant find repair files for this problem. Thanks for help


Problem is solved ;)

Pzolee
28th February, 2017, 07:35 PM
Hello, i have problem with ktag 2.13 6.070, i have codes c5555 and ktag is without functions. I cant find repair files for this problem. Thanks for help


Problem is solved ;)

How to solution?
Please uploading repair files.
Thanks

mecsoun
1st March, 2017, 07:43 AM
Must be formated NEW ( the other, an old can use next time) blank sd card... i copy update telucu17 files from mhhauto to folder KSUITE and after run ksuite software and now ktag works. Mist be installed driver for ktag and ktag must be plugged to pc. I find link for files.

Here is link.. if dont work link so write telucu17 to skype or find link on mhhauto...
http://www.digital-kaos.co.uk/forums/showthread.php/474771-KTAG-6-070-FREE-update-kit-update-instructions

r0my81
1st March, 2017, 01:15 PM
Thanks I'll take a look, now my problem is that I have to clone siemens sid804 and is not listed in ksuite...i read ecu list contents of ksuite 2.10 it is sid804! But my software right now is 2.08/6.070firm....I'm trying to update to 2.10/2.11 to see if appear sid804 in ksuite

Enviado desde mi m3 note mediante Tapatalk

tango
1st March, 2017, 01:58 PM
kess 4.036 use ksuite 2.08
ktag 6.070 use ksuite 2.11
been said many many times before

hesham10
6th June, 2019, 03:32 AM
i've ordered ktag 7.020 installed ksuite 2.23 ... software installed correctly and device manager reads data loader correctly and on info icon shows 7.020 but all protocals are gray ... what should i do ?

morgano
6th June, 2019, 08:33 AM
i've ordered ktag 7.020 installed ksuite 2.23 ... software installed correctly and device manager reads data loader correctly and on info icon shows 7.020 but all protocals are gray ... what should i do ?

Trash your ktag sd card and put good brand one on it. Read new card CID and post it here. I can make new SD image for your ktag.

hesham10
7th June, 2019, 01:50 AM
Is it a common problem on newly selled units ? Is there a missing information I can provide to be sure that this is the problem ? What's the new card specifications

morgano
7th June, 2019, 08:05 AM
Grey protocols normally means bad sd card. Happens usually with crap chinese sd cards.

Get your hands on a good brand one, sandisk, samsung, kingston,.. any size you can get is fine, 2gb card is more than enough.

hesham10
8th June, 2019, 10:09 PM
is that enough (cid)

morgano
9th June, 2019, 05:13 PM
is that enough (cid)

Yes, enough for me ;)

https://mega.nz/#!qFhQmYgY

Download your image there, download key sent in PM. No need format but you can do if you want. Use win32diskimager tool to burn the image to the SD.

hesham10
10th June, 2019, 01:45 AM
:party :thanks morgano works good .. no grey protocals anymore ..

morgano
10th June, 2019, 01:57 AM
:party :thanks morgano works good .. no grey protocals anymore ..



I know, enjoy your tool ;)

NOS KOS
2nd November, 2019, 08:44 PM
yes..........
Dear friend I have the same problem I tried to use ktag and I had connection to internet and locked
All gray can you please help me I.will be greatful

NOS KOS
3rd November, 2019, 06:37 PM
Any help please sos

INFINITY13
29th June, 2022, 06:49 PM
i need help to solve my blocked ktag
all options gone gray .
thanks in advance

jsdias
9th December, 2023, 01:35 AM
Thank you.