PDA

View Full Version : BDM adapter..



Jan1980
16th October, 2015, 08:25 PM
Hi mates. I want to buy a set of BDM adapters. It?s possible to use the same adapters on EVC BDM 100 and Alientech Ktag ? I own just one adapter for EDC16 at the moment with a 6cm position frame.

thx !!!

mihaiservice
16th October, 2015, 08:53 PM
You can use any kind of bosch bdm adapter if you can made some flat cable for each tool!

javyb
16th October, 2015, 09:00 PM
Anyone have pin out for ktag bdm?

CustomCars
17th October, 2015, 01:07 AM
javyb, BDM have and must have universal pinout so it will be that's same like galletto

Jan1980
17th October, 2015, 09:43 AM
Yes, bdm on ecu pcb is the same. But, how are the connections between bdm needles and the plug on bdm adapter ?


Sent from my iPhone using Tapatalk

javyb
17th October, 2015, 09:48 AM
javyb, BDM have and must have universal pinout so it will be that's same like galletto
I mean the pins coming out of ktag are they like fgtech or different

mihaiservice
17th October, 2015, 10:14 AM
All tools it have different pinout...

ominimicu
17th October, 2015, 02:12 PM
like fgtech for sure not...becuase fgtech has them mireored compared to standard BDM

Ihlberg82
18th October, 2015, 12:04 AM
Anyone have pin out for ktag bdm?


I also wonder about this.
Is pin 1 on the upper right corner?



336502

Rito
19th October, 2015, 12:38 AM
Here have some BMW examples adapters:

http://www.ecubay.com/