PDA

View Full Version : mercedes flap+EGR remove "Inlet port shut off motor"



ettaoussi
18th October, 2015, 08:17 PM
Please help me remove EGR and dtc 2513"Inlet port shut off motor" fault code from B CLASS edc16 cdi

Thanks in advance

saxon1978
18th October, 2015, 08:24 PM
try this and report.

mihaiservice
18th October, 2015, 08:28 PM
Even if someone will erase P2513 from flash that car still will be in limp mode !

ettaoussi
18th October, 2015, 08:45 PM
thanks for the reply! you also remove the DTC 2513 ?

gitko
18th October, 2015, 08:55 PM
I can make this car with disconnect flap and without limp mode :fat:

Takinava
18th October, 2015, 09:17 PM
I think that is not good idea at all, to eliminate "Inlet port shut off motor" from turbo diesel engine. But, yes it's possible to do, and without limp mode.

motorsportsz
19th October, 2015, 10:48 AM
Please help me remove EGR and dtc 2513"Inlet port shut off motor" fault code from B CLASS edc16 cdi

Thanks in advance



here you are pass in pm

ettaoussi
20th October, 2015, 10:15 AM
here you are pass in pm





thanks motorsportsz your job worked perfectly

stanislav georgiev
20th October, 2015, 10:56 AM
Hi motorsportsz ,can you tell me whether my decision to delete the error code is true. thanks

stanislav georgiev
21st October, 2015, 06:43 AM
Can I get some opinions. thanks

motorsportsz
21st October, 2015, 06:47 PM
Can I get some opinions. thanks

Send me original and I will do it for you also

stanislav georgiev
22nd October, 2015, 07:00 AM
Thanks motorsportsz , here's a file Mercedes EDC 16

motorsportsz
22nd October, 2015, 07:26 AM
Thanks motorsportsz , here's a file Mercedes EDC 16


here you are mate

stanislav georgiev
22nd October, 2015, 08:03 AM
Thanks motorsportsz ,to the rapid response and professionalism

snake80
23rd November, 2015, 02:34 PM
Hi motorsportsz, can u help me with e270 nedd to remove egr and p2513 and p2131.

mihaiservice
23rd November, 2015, 03:30 PM
Hi
here you have egr off file,you can disconnect the plug from egr !

snake80
23rd November, 2015, 04:04 PM
Egr its work perfect, but still p2131 on the diag, inlet port shutoffmotor.

mihaiservice
23rd November, 2015, 07:10 PM
Hi
here you egr off and swirl flaps off,disconnect the plug from both !

vandal32
26th July, 2016, 03:06 AM
hello can you please remove the flaps from this EDC 17 MB

vandal32
26th July, 2016, 03:08 AM
here you are pass in pm
hello can you please remove the flaps from this EDC 17 MB