PDA

View Full Version : Focus 1.6 tdci egr off help



kitioni
20th October, 2015, 03:01 PM
http://www.digital-kaos.co.uk/forums/images/icons/icon1.png Focus 1.6 tdci egr off
please help with tested dumps egr off
for focus c-max 1.6 tdci
ecu bosch 0281 011 263
3M51-12A650-MA
flash AM29BL802CB
i try with volta not function
thanks

mihaiservice
20th October, 2015, 05:31 PM
Only closed egr ? or with plug disconneted from egr ?

kitioni
20th October, 2015, 05:52 PM
with plug disconneted thanks

mihaiservice
20th October, 2015, 07:42 PM
Hi
here you have the file,dont forget to disconnect the plug from egr

kitioni
21st October, 2015, 08:22 AM
i try and the car not start

zi0m3k
21st October, 2015, 09:16 AM
Try this and report

mihaiservice
21st October, 2015, 09:40 AM
Hi
try again,checksum are updated in file ! same pass

kitioni
21st October, 2015, 11:06 AM
thanks the car start egr is removed bat engin is recovery 3000rpm
in diagnoses show P1187

mihaiservice
21st October, 2015, 04:33 PM
Hi
if you have read in BDM mode just write back eep contempt and no more P1187 stored in ecu !

kitioni
21st October, 2015, 09:44 PM
okthanks bat turn on egr any idea

CustomCars
21st October, 2015, 09:56 PM
Yes friend, you needed wire code from injectors into ecu.
That's solve your Carb error and back power to car.

kitioni
21st October, 2015, 10:41 PM
yes i try with texa diagnosis bat the engin 3000rpm

mihaiservice
21st October, 2015, 11:02 PM
Just write back eeprom and no more P1187 stored in ecu ! egr are off in the your file,just disconnect the plug !

kitioni
22nd October, 2015, 11:27 AM
i try to write eeprom not function, thes dump is eeprom ,flash eeprom and full bdm

mihaiservice
22nd October, 2015, 11:51 AM
Just write one by one,flash eprom and serial E2Peprom...

kitioni
22nd October, 2015, 12:33 PM
thank you for the times,i try to write one by one is samme errors P1187
i try with anether dumps eeprom and the errors is erase only data immo
maybe the original eeprom is corupted .
any idea to do partial or off thes dump

kitioni
18th March, 2016, 03:30 PM
ok mihai i try bat not suces file error size .my ecu have M68BW016XB flash eeprom , your file is for 29..... edc16c3 not for edc16c34