PDA

View Full Version : help with reading ford fiesta 1.6 TDCI 2013 please



mads36
21st October, 2015, 03:34 AM
hi all

this 2013 must be EDC17C10 PSA SAK tc1797 IRON
ford fiesta 1.6TDCI 95hp
2012 <2013

i have eu kess and tryed read it with it.
but i got falut like > can time out > frame time cut out > mrico wakup. and on on pic.

i then tryed with my tkag wth transdata and it just disconnect after apemt to read it.

i just followed the inst. on ech device. i then when to wikiobd and looked on the diag. over connections and boot pin. and then look in the ksuite again and transdata and then i decovered that the 3 has diffent connections pin on ech picture. and printboard is 100 % idenditical.

when i tryed with connection choosing from wikiobd 1 ground on pin 3 and power to pin 5 that is not in the 2 others pin outs the green light in bootloader was on amidaly. that only can on with 12v preseent on bootloader with kess ang ktag,

wich pin out sholud i follow for getting sugses with reading this ecu.. 337045337046337047337048337049
BG mads

dominik.m
21st October, 2015, 04:13 AM
FGTECH connection. Maybe help You.

aem
21st October, 2015, 04:18 AM
This kind of ecu with tc1797 have tprot 12 .trasdata cant read because tprot12 plugin is missing.fgtech clone no way.
i try focus 1.6 2013 with the same ecu a few days ago.no chance.


i see in your kess photo the same problem. Cant pass protection......

mads36
21st October, 2015, 04:34 AM
nthanks for the answer is that realy right that we cant get that sug.. to read it. so that a bit sad to hear and you dont think its coonnection problems at all?
the produkt data of car is 9/12 only 2013 model. but i bet you right anyway. <.( BS

aem
21st October, 2015, 04:40 AM
Focus that i wanna read a few days ago i think was 2012.conection is the same if you use a multimeter and check is just in another place.this ecu can be read with ori new fgtech.

if you select in trasdata tprot12 you will see a message plugin missing when you try to read.you selected wrong tprot 2/7

teamtuner
21st October, 2015, 06:37 AM
maybe this can help

aem
21st October, 2015, 11:52 AM
not work.i try

carmageddon
21st October, 2015, 12:23 PM
you can not do edc17c10 ford, password protected! you can do only edc17c10 citroen-peugeot because dont have password protection for cpu

mads36
21st October, 2015, 02:54 PM
okay DAME thanks for answering.. so only online tool will do this ecu /.

Miketune
21st October, 2015, 03:03 PM
Try To do this one with FG tech V54

teamtuner
21st October, 2015, 05:01 PM
Try To do this one with FG tech V54
ahahaha...no way mister...

mads36
23rd October, 2015, 03:28 AM
i drop to read this ecu my self. if hafe is saying it can?t then it can?t.. so called our local race tunerrs to hear if they would open it for obd by there CMD.(but hi say it only was abel all time by bootloader so hi souln?d) and for 180eu they will flash it and hi ask me if i had i file for it. i was at the time qiut sure i got one.. but after sometime i start thinking about that i never read it out so i dont have a file for this ecu. i got i ori file for also a 2012 fiesta. but regard to sw hw i dont no. so can i tune the file and use it. i have 2,5 hour driving to the tuners 230km so likewice only 1 chance to get it 200% working then i get home agian so can i used the file ihave or can any help out. i will go there to night so please help me
BG

teamtuner
23rd October, 2015, 07:03 AM
do not use one file from another car into your car...need to remap Your file...

mads36
23rd October, 2015, 07:32 AM
Yes of course. Thats thumfinger role. situations where orgi is lost some askes for same fole so just thougt it was posibel. I then tune it at there place on my pc then

Gibek
22nd November, 2015, 12:56 PM
I read this ECU easily with FGTech v54 and KTAG with no problem. ford number BV61ACD

kukukatsu
5th February, 2016, 10:35 PM
i have two ecus with same numbers fw and sw (honda edc17cp16) one i read and write with fgtech v54 clone, second i cant done with fgtech clone. Kess clone do it with no problem. So i think problem is tprot... same as in your fiesta

Smac_a
7th January, 2018, 02:08 PM
Hi.

I know it's an old thread, just to clarify if someone is looking for info - it can be read/written with extra GPT cable - 14P600KT06 (google pinout if you need it) with KTAG (I used hw. 7020 clone).

Best regards,
Smac_a