GolfmkI
22nd October, 2015, 05:13 PM
I have a little nightmare
Car is Fiesta 2007, lost sync with Ecu.
I have Small soft from carprog to sync Ecu to dashboard...I can see clearly that is mismatched....
Software seems sync ok. Data match .Software makes work good...it seems...
Original eeprom is 2kb ( 8kb when read BDM). Carprog soft only allows the 2kb format so used this way. Therefore I upload files on both formats.
With original eeprom car doesnt start ( it doesnt sync) but diags ok.
If I made any change in eeprom 95160 (for example making sync), when write it in Ecu it does not diag ok....Checksum error and diag works very bad....
Load again ori eeprom and all diag ok, checksum error dissappear.
So seems I am not able to make any mod in eeprom.
Tried in 2kb format (direct read) and in 8 kb option ( simple BDM reads eeprom 4 times)...
No luck with anyone.
Ecu dont work with any eeprom I mod.
Tried other full flash and same problem.
Does this 95160 has checksum????
FOMOCO
6S61-12A650-VA
DZL7C
0281011612
Fiesta tdci
Is there any tool to correct checksum??? Must be manual correction??
It will be the only explanation to my problem.
Thanks beforehand
Car is Fiesta 2007, lost sync with Ecu.
I have Small soft from carprog to sync Ecu to dashboard...I can see clearly that is mismatched....
Software seems sync ok. Data match .Software makes work good...it seems...
Original eeprom is 2kb ( 8kb when read BDM). Carprog soft only allows the 2kb format so used this way. Therefore I upload files on both formats.
With original eeprom car doesnt start ( it doesnt sync) but diags ok.
If I made any change in eeprom 95160 (for example making sync), when write it in Ecu it does not diag ok....Checksum error and diag works very bad....
Load again ori eeprom and all diag ok, checksum error dissappear.
So seems I am not able to make any mod in eeprom.
Tried in 2kb format (direct read) and in 8 kb option ( simple BDM reads eeprom 4 times)...
No luck with anyone.
Ecu dont work with any eeprom I mod.
Tried other full flash and same problem.
Does this 95160 has checksum????
FOMOCO
6S61-12A650-VA
DZL7C
0281011612
Fiesta tdci
Is there any tool to correct checksum??? Must be manual correction??
It will be the only explanation to my problem.
Thanks beforehand