Bmw X5 2008 3.0 Diesel, after update CAS car no start

[roman_auto]

Hi all
Dealer has try to update DDE and after the update finish is go to CAS and after thoos car no start anymore, now no comunincation with Cas, is there option to put manually software on it i have Xprog ans some more programmers and latter to change Vin with Fvdi, or have any other idea ?

Siemens Vdo
5WK4951VBR
CAS 3

Thanks

[roman_auto]

Mybe some one have flash for this Cas ? i write it with xprog

thanks

[garabounga]

Has the dealer screw up ?or you screw up ?because if its the dealer its his responsability to make it work again

[roman_auto]

he screw up and me working for money

[caliskan71]

upload cas label and your cas dumps,you need valid flash first for communication

[roman_auto]

I upload flash and eep, i try 2 files i found for the flash and the car still dead nothing work, and i can see the problem in the flash so why is still no working, thanks guys.

i upload the label too.

[mtey]

Try again write VIN and start system time , use tool32 program , maybe help

[roman_auto]

I cant, i dont have comunication with cas via obd anymore, just can read and write mcu with R270, what i can do more ?

[bearheroes]

this is the only correction i can find in file...rest seems ok.Try to write new flash. Sorry but now i can't check if i have because time is late and i've finished work...:)

[roman_auto]

i dont have pass for the file, mybe some one can help minwhile cant solve.

[cfgebel]

i have ther same pro with x6 but i can diag via obd

i solve my pblm with avdi

[roman_auto]

In my case no comunication via obd, but i can read/write mcu, so why after write flash i found in forum still no, and how youbdolve with Avdi ?

[tech_cz]

Here you have correct flash:

338770

WBR, Marek

[snatchme]

Hello See my thread #11; http://www.digital-kaos.co.uk/forums/showthread.php/288074-CAS3-X6-Urgent-help-Needed!!

If your ISN Coding of engine ecu and auto gearbox is: C8 1E and D8 D2.
then a corrcted Eep file is here in the attachment.

Sorry here is corrected file..

If usefull, press thanks

Grtz

[Locksmith Hungary]

đđĐđß$đĐßđßđßđđääđłldkf>>;*;ßßߤߤ;>>;>ßߤ]$ß$÷÷×ßß]¤¤¤]ß$$[ß[¤ĐĐß[ß...

[bearheroes]

xprog format.

[roman_auto]

I have only R270 to write file, my xprog read but not write.
R270 is ok for this ?

[Locksmith Hungary]

"ß$¤ßłpúőpúßßłŁ$ßßłjáßßłßł$×÷łŁł¤ß=

[bearheroes]

Hello See my thread #11; http://www.digital-kaos.co.uk/forums/showthread.php/288074-CAS3-X6-Urgent-help-Needed!!

If your ISN Coding of engine ecu and auto gearbox is: C8 1E and D8 D2.
then a corrcted Eep file is here in the attachment.

Sorry here is corrected file..

If usefull, press thanks

Grtz
You are very very wrong... :)
About isn, egs and correction you made...
If you are not absolutely sure about what you say please don't say it...

[roman_auto]

First i want to thank all for the help, after i put flash i have comunication to CAS but beside brake light and some beeps nothing happen, i think the key is not in eeprom and that eeprom any more, how to code key ?
Fvdi good ?

[bearheroes]

Write key id


Sent from my iPhone using Tapatalk

[roman_auto]

how to write key id , with tag key ?

[roman_auto]

read by zedbull : F90CC796
chip: pcf 7953
type 46

[bearheroes]

keys is coded...what error you get in diagnosis?

[roman_auto]

keys is coded...what error you get in diagnosis?

no errors, when i connect fvdi i can see no key is reg, and the remote not work and the dash not open, but i have comunication and lights, i thinks the switch not open the dash cause the key is not coded,

[gentiabazi]

Yes because u flashed incorrect flash.
If u have icom or k+dcan cable, reflash CAS with WINKFP Comfort Mode

Best regards, Genti.

[roman_auto]

Update!
After all the flashes i write to the unit, all itry car no start and no switch open with keyless, but i can see that the problem is 100% in the eeprom alought told me eeprom is good and i thank all for thir help, why i think is in the eep ? cause if i put other eeprom from other car, light works in dash,serval leds and beeps,and handbrake light to with key figure, car seem to be half alive but affcourse no start, i try it with serval eeprom and all the same and have all info like part number and etc,,
with the org eeprom when i write it to the car, is dead no light no beeps no nothing, and no part number or other information in the cas unit, no mech key or reg keys, so mybe can look on the org eeprom and repair it mybe if can.

Thanks alot all

[roman_auto]

any last chance to save the sitution here, i am sure eep dump doing all the proble, alought it look good, mybe some one cam help.

[nexusjose]

Your CAS is corrupt , change for new CAS 3 and the problem dissapear
Regards


Enviado desde mi iPhone utilizando Tapatalk

[bhpmotorsport]

Wich tool did you use for that friend..??