Need help pin IMMO Megamos f+g Audi

[comnic5]

Hello everyone.

I just dumped the 93lc46 from my audi a4 immo, megamos f+g.
I tried to calculate pin with IMMO Tool but shows ERR.

Can anybody hepl with this please.
Attached is the dump file.
Thanks.

[haroutioun]

Hello.
your dump looks not good.

[wn57]

f + g megamos
creamy cover and black plug ?

[comnic5]

yes. this is it. its 4a0953234f

[comnic5]

Hello.
your dump looks not good.

I dump the file with an eeprom programmer, tl866cs. When read the program says that everything its ok.

[wn57]

Here you are ....

338364

[haroutioun]

Hello.
i load a dump for you with pin code 00989.

[comnic5]

Hello.
i load a dump for you with pin code 00989.

Thanks mate. The dump wasn't good. I read again and calculate pin with Immo-Tool. PIN is 01523. I attach the new dump. Can you confirm PIN ok?

[wn57]

338376

pin 01523

[haroutioun]

Hello.
try write this dump in your immobox,yours have little error in dump i repair it. & yes the pin = 01523

[comnic5]

Hello.
try write this dump in your immobox,yours have little error in dump i repair it. & yes the pin = 01523

Thanks mate. I will try this. The odd thing about this is that when I try to adapt the new key with VCDC 12.12 it doesn't log in. Do you think that this error could be the problem for error login in VCDS?

[haroutioun]

Thanks mate. I will try this. The odd thing about this is that when I try to adapt the new key with VCDC 12.12 it doesn't log in. Do you think that this error could be the problem for error login in VCDS?
Hello.
all can possible,just when write the file in immobox,try leave the ignition on about 30 minute & after login.

[comnic5]

Hello.
all can possible,just when write the file in immobox,try leave the ignition on about 30 minute & after login.

I'll try this today.

Solved. The code was good. I waited 30 min. with ignition on and finally accepted the code. Key adapted. Thank you all. :tee: