PDA

View Full Version : DPF Mercedes class B 180CDI



mecsoun
28th October, 2015, 09:26 PM
Please can someone help me with this file. I need to do dpf off. it is MB class B 180cdi edc16c32 ecu.

338440

338442

Andrei2015
28th October, 2015, 10:07 PM
dpf off file338451

mecsoun
29th October, 2015, 12:02 AM
Thank you very much. Your help was really fast. try it tomorrow in the car but I think it should work. inscription how it works. thank you

mecsoun
29th October, 2015, 07:25 PM
Dont work. I have dtc 2359 and limp mode :'(

ludbe
29th October, 2015, 08:12 PM
Dont work. I have dtc 2359 and limp mode :'(

if interested 100% working solution - pass by PM

Andrei2015
29th October, 2015, 08:26 PM
Dont work. I have dtc 2359 and limp mode :'(

P2359 is low boost, better check turbo pipes, it has nothing to do with dpf off file

mecsoun
29th October, 2015, 08:33 PM
if interested 100% working solution - pass by PM

I dont have pm from you

mecsoun
29th October, 2015, 08:34 PM
P2359 is low boost, better check turbo pipes, it has nothing to do with dpf off file
With the original software, this fault is not a car goes normally only a problem with DPF. The fault is with DPF and off set.

Andrei2015
29th October, 2015, 08:45 PM
With original software do you have limp mode because of dpf?

mecsoun
29th October, 2015, 08:53 PM
With original file is without limp mode and dtc is only 2084. With your file is limp mode and dtc 2359 and i have disconnect sensors

Andrei2015
29th October, 2015, 09:02 PM
What sensors have you disconnected? Try my file but connect all sensors, only difference pressure sensor and dpf temperature sensors have to be disconnected

mecsoun
29th October, 2015, 09:03 PM
I disconnect only diff sensor and temp sensor. I tested with and without sensors. Problem is limp mode and only one dtc 2359

Andrei2015
29th October, 2015, 09:13 PM
try this one. same password338655

mecsoun
29th October, 2015, 09:20 PM
I go to try

mecsoun
29th October, 2015, 09:34 PM
the problem is still the same

mihaiservice
29th October, 2015, 09:38 PM
Hi
just write this file,disconnect differential pressure sender also both temperature sender from dpf



Regards

Mike

mecsoun
29th October, 2015, 10:23 PM
I tested you file and from ludbe and problem is same.

mihaiservice
29th October, 2015, 10:34 PM
Are you sure the file are original ?
try again,same pass !

mecsoun
29th October, 2015, 10:36 PM
Yes. My file is original from car. I test this file.
In all files is problem only with dtc 2359.

mecsoun
29th October, 2015, 10:52 PM
Are you sure the file are original ?
try again,same pass !

Get car work perfect.

mihaiservice
29th October, 2015, 10:53 PM
You have to make a test drive,reconnect all sensors from dpf and write back original file,the car must go in limp mode after 50 km without dpf pipe !

mecsoun
29th October, 2015, 10:56 PM
a second version of the branches upravy car is great. Without dtc and sensors is disconnect.

mihaiservice
29th October, 2015, 10:59 PM
Please can you say again in english ?

mecsoun
29th October, 2015, 11:42 PM
Car work great with your second version. Sensors are disconnect and car work without dtc.

mihaiservice
29th October, 2015, 11:48 PM
Thank you !

mecsoun
30th October, 2015, 12:03 AM
Good work ;) thank you :)