danyparis
29th October, 2015, 04:29 AM
Hello,
I have problem with Opel OMEGA B 2001 Y25DT with engine BMW 525D 150hp
I removed the ECU (EDC15C4) from car for repair some big mechanical problem and when i install it, the car don't start.
The DTC is P1613-1, i try to reset engine controller and IMMO2 for synchronise it with OP-COM, all it's ok but the car don't start, i have allways the DTC P1613 "Wrong or no signal" from immobox
before this DTC the car start ok.
The wire is ok, all connector are ok.
It's the same trouble for second time. The first timo i have to change all starter kit and now i can't start this car again.
Thanks
I have problem with Opel OMEGA B 2001 Y25DT with engine BMW 525D 150hp
I removed the ECU (EDC15C4) from car for repair some big mechanical problem and when i install it, the car don't start.
The DTC is P1613-1, i try to reset engine controller and IMMO2 for synchronise it with OP-COM, all it's ok but the car don't start, i have allways the DTC P1613 "Wrong or no signal" from immobox
before this DTC the car start ok.
The wire is ok, all connector are ok.
It's the same trouble for second time. The first timo i have to change all starter kit and now i can't start this car again.
Thanks