PDA

View Full Version : Audi A4 2.5TDI EDC15VP - Intake flap disable



vopi
1st November, 2015, 08:04 PM
Hi, is there anybody who can disable the intake flap on this car? Audi A4 2.5TDI with EDC15VP ECU 1MB.
Car has these DTC:
01282 - Intake Manifold Flap Change-Over Valve (N239)
19558 - Motor for Intake Manifold Flap (V157): No Signal

if I Disabled these error, car still has limp mode around 120km/h - So make only DTCoff is not good!
Please help me

Thanks

bursuc
1st November, 2015, 10:04 PM
Resolve your problem by changing the inlet flat actuator - motor . It is a bit of stripping down but i think this will be the best way .

Regards

Sent from my SM-N910F using Tapatalk

vopi
2nd November, 2015, 10:18 AM
Yes you are right but I wanted to know if there is a way to disable this flap.

mihaiservice
2nd November, 2015, 10:55 AM
hi
you can build one small regulator with NE555 to bypass swirl flaps,all parts not are more than 0.99 euro

teerak2uk
2nd November, 2015, 10:57 AM
If same as Mercedes only needs a resistor on motor plug!!!!