problem with read EIS W211 MODEL 2006

[almagssbe]

Hello
i haveproblem with read R270
can not read with r270
There is little difference
or how to read with r270
pls
help me

[Bllinda]

only xprog .... 340360

[thephenom]

Must be error in model year. You have old type of MCU 912. Rosfar does not support this one(support but dont work) X-Prog.. But a litle risk of damaging flash.

[almagssbe]

Must be error in model year. You have old type of MCU 912. Rosfar does not support this one(support but dont work) X-Prog.. But a litle risk of damaging flash.

youmean try with xprog or not work
thanks

[gencho5]

Mcu is 68HC912DG128. Don't try this with R270!

[thephenom]

youmean try with xprog or not work
thanks
Yes, I mean do it with X-Prog by schematics above.

[almagssbe]

how make new keys or how to read ??
thanks

[hamzadaw2000]

Read using xprog, it is safe, or AK500, if need more information. Contact me on Libyana phone 0925819786


Sent from my iPhone using Tapatalk

[lion0304]

how make new keys or how to read ??
thanks

I read with R270 no problem. You need choose the correct maskset of MCU for R270. W211 had 0K50E and 3K91D.
Here diagram for Xprog and R270.
Xprog read with MCU part
R270 with MCU maskset
340426340427

[almagssbe]

only xprog .... 340360


ohhh
i read with xprog-m
but eprum all fffffffffffffff
what is problem ????

[almagssbe]

today read eis with xprog , and r270 , upa
mcu empty al ff ff ff ff
if read with all memory with upa ok
but not have keys

[almagssbe]

Today I found the key


A problem occurred key did not work well
Not open the lock and there is no sign out from eis coil chk
i sure read with r270 and xprog all data ff ff ff ff ff ff ff ff ff
what is problem

pls i need help

[autodigitec]

If you are sure the eeprom is erased and you don't have any backup there is nothing you can do to restore the original data.
You can write a eeprom from the same EZS that you can find here in the forums, make new key, renew esl, renew ecu and it will start but keys from the dealer will not work anymore.

[almagssbe]

I NEED ALL DATA EPRUM AND FLASH , ESL , ECU, DASHBORD
THANKS

[PierreTheron]

Mate search for your data on here.
I had to use data from here a lot off times to fix my problems..
so spend bit off time on this great forum and you will become knowledge rich. Maybe not money rich ..

[almagssbe]

OK
i found this , i can write key ok and ecu ok, and esl ok ,but EIS file not same size
i used r270 , this file with xprog, try all step for read with xprog not work me
pls help me

[MVVL]

Hi. Damp ok.