PDA

View Full Version : Audi A6 2.0TDI 2007 remove multitronic (automat)



Serg1o
9th November, 2015, 05:47 PM
Hi Br.
Please help with remove multitronic (automat). After remove miltitronic ECU not accept new coding with manual gearbox. Audi A6 03g906016gc Bosch EDC16U31 0281012169 engine R4 2,0TDI BRE. Read Galleto4 from OBD. Dump with DPF OFF.
Thanks in advance.

twchnodictator
9th November, 2015, 06:03 PM
Maybe it needs to be recoded with VAG KKL cable and VAG-COM software?

Serg1o
9th November, 2015, 06:05 PM
Maybe it needs to be recoded with VAG KKL cable and VAG-COM software?

With BOSCH KTS and VCDS, NOT coded.

Tapatalk

pawel11
9th November, 2015, 08:24 PM
Hi
Read ecu only bdm and write flash from manual. Test 100% ok

Serg1o
9th November, 2015, 08:31 PM
Hi
Read ecu only bdm and write flash from manual. Test 100% ok

Thanks. Its 03G906016MH 0281014261. I need 03g906016gc, Bosch number 0281012169. The block number should be somewhere nearby.

pawel11
9th November, 2015, 09:17 PM
GC is only mulntitronic no code maual. Write bdm flash MH auto work ok

Serg1o
13th November, 2015, 09:22 AM
Hi
Read ecu only bdm and write flash from manual. Test 100% ok

This version not work. I programm only flash.

Serg1o
20th November, 2015, 09:18 AM
Hi Br.
Problem solved. Write full BDM dump, with immo off, eeprom, flash and MPC. Car start, coding accept. Here full dump for BDM100. Bosch 0281012112 03G906016GB. This version for manual transmision.
Thanks for all.

eprst
23rd December, 2017, 12:20 PM
Hi, maybe somebody knows what to do in order to auto start and after switching off the ignition and gave the key?
Thanks
Regards

Dragan78
10th April, 2019, 05:07 PM
Today I wrote bdm flash from Pawel11 and the car start ok. The ECU accepted manual coding.
Does someone know what to do to take key out after replace automatic transmission with manual ?

Dragan78
11th April, 2019, 08:18 AM
After reserch I figure that after remove the trim of switch their is a small hall on the ignition switch were push and the key came out.