PDA

View Full Version : audi a3 airbag problem?



king27ali
10th August, 2009, 12:18 PM
hi all,

i have a problem for audi a3 airbag

i read fault code with vag com and

fault code is 01218 - Side Airbag igniter: Passenger Side(N200)

i cleared but give same fault

how can i solve this problem
can anybody help me ?

lupu_sandu
10th August, 2009, 03:24 PM
01218 - Side Airbag Igniter; Front Passenger Side (N200): Resistance too High

Possible Symptoms



Malfunction Indicator Lamp (MIL) active

Possible Causes



Wiring/Connectors from/to Side Airbag Igniter, Front Passenger Side (N200) faulty
Side Airbag Igniter, Front Passenger Side (N200) faulty

Possible Solutions



Check Wiring/Connectors from/to Side Airbag Igniter, Front Passenger Side (N200)
Check Side Airbag Igniter, Front Passenger Side (N200) faulty

Check Measuring Value Blocks (MVB)

king27ali
11th August, 2009, 08:09 AM
thanks for help

hydi
11th August, 2009, 09:14 AM
hi all,

i have a problem for audi a3 airbag

i read fault code with vag com and

fault code is 01218 - Side Airbag igniter: Passenger Side(N200)

i cleared but give same fault

how can i solve this problem
can anybody help me ?

It's a very common problem with early VAG cars where the airbag connection wire runs directly across the bottom of the seat so when people keep sitting in the chair it stretches/breaks/loosens the wire.

If making sure the connection is good at both ends and you've used electrical connection cleaner or something on the plugs and it still brings up the fault then replace the wiring loom and this should fix the problem.

PS: If you decide to use a volt meter never do it with the wire plugged into the airbag as any sort of electrical discharge can fire the airbag..