Bmw x1 e84. 2010. Please. Help

[paul2797]

Bmw. X1. I have. Ecu change. And programing done with. Autohex. But. Car. Not. Start
Sso please. Se. Attached. Dump. And. Help. Me please

[decno1]

Programming not enough to let your car starts
Go to ISN manger to match ISN between CAS and DME

[marek128]

U need use Proff INPA with good files, Icom, OR BMW Explorer, PaSoft 2.20 can do to.

[decno1]

U need use Proff INPA with good files, Icom, OR BMW Explorer, PaSoft 2.20 can do to.

It is EWS tampering dude.
He just needs to match ISN

[mihaiservice]

With one virgin eep dont need any ISN !

[sogaro]

Follow Decno1 and you will be happy for it

[marek128]

if need rewrite ISN u need use ak300 or bmw explorer or virginese ecu and prog and code to car by Icom.

[sogaro]

He does not need all that, he has all he needs in his Autohex2, a little fiddling around with the tool will get him victory


Sent from my iPhone using Tapatalk

[paul2797]

hi,

dear all thanks for help, i have replace ecu with virgin ecu,match ISN with cas and dme, but ignition switch stop working, after that autohexII personnel come online and some files write with autohexII AND MATCH ISN WITH CAS AND DME. NOW IGNITION SWITCH WORKING BUT ENGINE NOT START, PLEASE HELP. I am not that professional with BMW cars

[decno1]

After matching ISN, what fault code you get in DME and in CAS?
If the fault not EWS tampering protection, then you must follow regular diagnose, could be anything,