PDA

View Full Version : BMW 335 MSD80 KessV2 (2.06) x FGtech V53 euroclone


OVERSPEED
11th November, 2015, 08:53 PM
Someone tried MSD80 twin turbo engine with one of those clones :

(China) Kess clone V2.06 or (euro) miniFGTech V53


Customer is insisting to take the risk...
motorsportsz
11th November, 2015, 08:54 PM
msd80 works fine with euro galletto
moky
11th November, 2015, 09:43 PM
overspeed,

problem is on msv80 with fgtech but be careful with all this ecu with Fgtech......surprise will perhaps for you...(siemens ms always read 100% fine...problem is in flashhh ahahahglagla ...) ,prefere last good Hw kess (of course more recent)...work is really better and more Stable...

fgtech is good but now .....little old and fgtech did'nt optimise their product on this "old" ecu...others yes... so more stable

don't take chinese risk..buy good euro...or better,official when you can :D


Good luck !
OVERSPEED
12th November, 2015, 01:09 PM
I tried MSV70 with FGtech (Mini euro V53 from Portugal) it read OK, but failed Writing and no start, write original file again and all fine... it?s the same risk ?
J_amb_o
12th November, 2015, 04:06 PM
checksum problem with clones on write.
OVERSPEED
12th November, 2015, 04:28 PM
checksum problem with clones on write.

Can i checksum with other sw and just write with fgtech?
J_amb_o
12th November, 2015, 08:59 PM
no, as it will recorrect incorrectly
OVERSPEED
13th November, 2015, 12:22 PM
Damn ! Kkkk i allways thought cks would be opcional when writing!
tunertool
13th November, 2015, 01:32 PM
Use Kess euro clone... works good
overs0ull
14th November, 2015, 09:10 PM
Kess v2 work perfect over obd read/write lot of them .
weekdgl
4th January, 2016, 04:38 PM
Kess v2 work perfect over obd read/write lot of them .
write a lot of msv70 with no problem you said? kess clone v2.15?
Shaheenem
4th January, 2016, 07:45 PM
Kess works fine
Andrei2015
4th January, 2016, 09:01 PM
kess work's fine but it takes some minutes so make sure you connect battery stabilizer
moky
21st January, 2017, 09:01 AM
hi

i have a problem on msd80 (135i N54)

readed with genius modded checksum with winols official and don't start
original start then readed with kess ,mod and flash and don't start.......i did a lot of siemens with kess and never problems...
someone have an idea?
thanks
OVERSPEED
22nd January, 2017, 12:36 AM
Had same issue, You can?t mess with torque limiter and some other things, and can?t go over 18/19psi either without modify these limiters
moky
22nd January, 2017, 01:59 PM
solved it was checksum problem..thx !
arvydom
20th April, 2018, 02:23 PM
how you solved checksum problem?