Pin for bsi peugeot 307

[Romanky]

PIN immo for BSI peugeot 307 BSI VALEO 96 36 76 05 80 F Boot 7.2 procesor motorola HC 912 DG 128

[Bllinda]

.... .... ....

[ypiter]

34CF.............................

[Romanky]

Please virgin BSI if it's OK,, not me logged immo code, vin that's ok ! diag lexia

Replace the pulley do BSI for elderly.

[Romanky]

BSI gives older and I made the Virgin HC12DG128
and I can not learn the code Immo 34CF with original orig pin.

Something is wrong ???

[vlaki electric]

P34C is your pin and here is your virgin file... pass pm
341686

[Romanky]

But 34CF wrote the code is OK,, why the code P34C ? I give it to handle a new chip ?

[vlaki electric]

34CF is not good code. with my virgin file you can back yours old keys and pair with ecu. yours pin is P34C from first dump
if not pair yours old key,give new chip and must work

[Romanky]

OK daf Thus, the new chip to move,, But what about the engine ECU will have a different code old or not ?

[vlaki electric]

no,your engine ecu have pin P34C and when you make new key he is gona pair bsi with ecu with this code,when you work virgin you can put code wich you want but you do only bsi so engine ecu stay on old pin. try with old keys and if not then try new chips...

[Romanky]

OK Thank !

[Romanky]

So I tried virging,, and code P34C a new chip in the key and not learn !!! What dale solution ? What if I reprogrammed the original HC912 to druhyho BSI BSI ?

[Bllinda]

an ecu? read eep.rom, fla.sh

[Romanky]

Well I have read EEPROM engine ECU,,, on immo OFF ?

[Bllinda]

read ECU eeprom flash, you know exactly pin.

because here is yet another pin.code

Please virgin BSI if it's OK,, not me logged immo code, vin that's ok ! diag lexia

Replace the pulley do BSI for elderly.

[Romanky]

I just do Replace the pulley BSI scrapyard and they need to learn and adapt to it.

[Romanky]

HELP : PIN immo for BSI peugeot 307 BSI VALEO 96 36 76 05 80 F Boot 7.2 procesor motorola HC 912 DG 128

[Johnner]

Try FS4W ? Or reverse

[Romanky]

I'm not sure TVW4 ? I must now try code.

[vlaki electric]

pin is VW4S

[Romanky]

Help code immo

PIN immo for BSI peugeot 307 BSI VALEO 96 36 76 05 80 C 9644096180 Boot 7.2 procesor motorola HC 912 DG 128

[Johnner]

I could be wrong here mate...but that file looks rubbish to me :dontknow:

[Romanky]

Is it possible that the falling of BSI, so the code about the engine ECU ?

[Romanky]

HELP : PIN immo for ecu peugeot 307 eeprom 5P08C3 Bosch 0 281 010 747 EDC15C2 06 435 248 80



pin xxxx ?

[Shmortz]

read again dump and post here

[PierreTheron]

Seems file does not look correct . What programmer you used to read this ???? 5p08 .. Xprog ?

[Romanky]

programator elnec slovakia

[vlaki electric]

...................................

[vlaki electric]

i am sorry i watch another dump. pin from your dump is YBQS