PDA

View Full Version : SKODA OCTAVIA 2007 MPI NEED MORE POWER



NORSHAN
17th November, 2015, 12:24 PM
HI ALL
I need tuning file for skoda octavia 2007 engine MPI 8v 1600cc 74 Kw
ECU SIMOS71 No 06A906033FC auto gearbox
octavia 2010 same engine and ecu simos71 has original more power about 101 Kw

bobolin4o
17th November, 2015, 01:17 PM
Mmm... you want 27 Kw more... from 1.6 liters, 8 valves engine...
How do you think, it is possible to achieve this?
Shame yourself!

CustomCars
17th November, 2015, 02:15 PM
Lol, crazy ! Add turbo then that's value will be possible :)
If you say engine is that's same get ori file and try that one in your engine.
But better try compare ignition

NORSHAN
17th November, 2015, 04:19 PM
please read my post good i didnt ask for 27kw from 1.6l MPI
i ask for more power 10kw fine if you can add 1kw i will try it
shame yourself not I
that possible or not
this job for masters not for you
no need more bad words

CustomCars
17th November, 2015, 05:17 PM
Always can add few kw by change ignition, always...

twchnodictator
17th November, 2015, 07:25 PM
Mmm... you want 27 Kw more... from 1.6 liters, 8 valves engine...
How do you think, it is possible to achieve this?
Shame yourself!

It''s possible to add even 100kw. Just fit new engine.:goodpost:

spychu14
17th November, 2015, 11:10 PM
Anyone have tested on dyno mod file for 1.6 8v BSE engine ? How much of kw and torque incrase is possible ?

bobolin4o
18th November, 2015, 06:59 AM
please read my post good i didnt ask for 27kw from 1.6l MPI
i ask for more power 10kw fine if you can add 1kw i will try it
shame yourself not I
that possible or not
this job for masters not for you
no need more bad words

Congratulations!
You just lose the chance to get a good remap from me (non-master).
Cheers!

bobolin4o
18th November, 2015, 07:08 AM
Always can add few kw by change ignition, always...

And those few Kw, you'll never feel on the road, only on dyno... I can say - they are within the statistical error.
BTW, as i'm not a MASTER... this engine have not MAF, only MAP... calculations of the AFR are not so simple, and someone must to tune this virtually? I don't think so...

NASTASE
18th November, 2015, 04:47 PM
And those few Kw, you'll never feel on the road, only on dyno... I can say - they are within the statistical error.
BTW, as i'm not a MASTER... this engine have not MAF, only MAP... calculations of the AFR are not so simple, and someone must to tune this virtually? I don't think so...
I agree with you Bobolin40,no more than 10HP can get from this N/A engine.Without AFR Gauge, can't do a proper tuning for this N/A engine.Lot of work for nothing.If you run lean, will melt pistons, if you run rich, throw gasoline on exhaust,that can be result of tuning without AFR tool.