View Full Version : opel insignia 2010 pin code
issam2
17th November, 2015, 01:18 PM
hi i need opel insignia 2010 pin code from eprom 24c16 plz
thks
Bllinda
17th November, 2015, 01:37 PM
.... .... x30x
hi i need opel insignia 2010 pin code from eprom 24c16 plz
thks
Thanked 0 Times in 0 Posts
vlaki electric
17th November, 2015, 01:58 PM
4306 is pin code
ABD ERRAHMANE
17th November, 2015, 02:47 PM
TRY ..4306..
issam2
17th November, 2015, 05:08 PM
will try and report thks
neimy
17th November, 2015, 05:34 PM
hi i need opel insignia 2010 pin code from eprom 24c16 plz
thks
try these coed 4306
341959
plasma533
17th November, 2015, 07:17 PM
is this from the BCM?
EDIT: scrub that, yes it is....
Bllinda
17th November, 2015, 08:52 PM
.... yes ....
is this from the BCM?
EDIT: scrub that, yes it is....
issam2
19th November, 2015, 10:43 AM
4306 the code is ok thanks every body
levisdj
24th October, 2017, 01:18 PM
To reprogram keys do you need pincode from BCM or from dash ? Or it's the same ???
Zapp
24th October, 2017, 01:28 PM
To reprogram keys do you need pincode from BCM or from dash ? Or it's the same ???
If there from the same car, pin is the same
levisdj
24th October, 2017, 04:18 PM
it's from the same car, yes, not recognising keys after battery went flat, what could be wrong ?
plasma533
24th October, 2017, 05:53 PM
wonder if BCM has forgotten the keys, was a common issue on the corsa d
levisdj
25th October, 2017, 06:11 AM
So what's the procedure ?
Edit : I have B389A-00 Enviroment Identification stored in BCM, what could be the problem ?
Bllinda
25th October, 2017, 08:52 AM
Dtc B389A-00 occurs after bcm change or unsuccessful programming ... (http://www.autocats.ws/manual/chevrolet/tis0911/en/documents_2012/Aveo/SM-T/92535695.en.html#ss10-2535695).
levisdj
25th October, 2017, 09:03 AM
So how to solve it ? I releant the keys with opcom and fvdi ... they go ok... the BCM is original of the car
Edit : BCM part number 13580696 ... I opened inside, doesn't have water damage or any sign of corrosion... if I upload the dump in the 24c16 will it be to any use ? Or if I replace the dump with another one on the forum ? any assistance is welcomed
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.