PEUGEOT 3008 YEAR 2012 LOCKED

[achaccha]

Dear Friends.
I need your help to find a solution to a Peugeot 3008. Someone try to read the pin code with a tool according to the characteristics reported by the customer may be Fvdi or Avdi. after this attempt, dashboard went off and can not be diagnosed with any escanner.
Anyone have any idea what could have happened, maybe the BSI blockade. If so will be possible to BSI virgin?
I appreciate if someone can provide the virgin file for this BSI.
thanks for your comments.

[coelhone]

try to
put bsi on place and scan errors with lexia in bsi

[jnoroeste]

Hi M8, use hq pictures, it?s impossible to see anything on the board.
I gess is a Johnson Controls bsi , there are a lot of this with problems after tried to read and went into bootmode. even try to read pin and bsi went ko.
Must use power supply for all procedures with this bsi type.
Confirm bsi?s brand and model.

Regards,

[achaccha]

The BSI is Johnson Controls ( 966689568002) BSI04EV K04-00211010. I tried to scan using lexia and x431, these two scanner does not communicate with any module. Everything is completely dead and the engine does not start at all. We have tried to give IG power supply 12V. The instrument panel turns on and the windshield washer starts running but not enter the escanner to any module.
I welcome your comments.
Thank you

[aslamaslam]

your pm.......

[coelhone]

The BSI is Johnson Controls ( 966689568002) BSI04EV K04-00211010. I tried to scan using lexia and x431, these two scanner does not communicate with any module. Everything is completely dead and the engine does not start at all. We have tried to give IG power supply 12V. The instrument panel turns on and the windshield washer starts running but not enter the escanner to any module.
I welcome your comments.
Thank you
corrumped bsi.........

[benzerrouki]

send you a pincode in PM

[nazz2]

Have a look at this link, you might get lucky.

http://blog.obd2express.co.uk/2015/06/24/johnson-control-bsi-goes-into-bootmode-not-killed-by-fvdi/

[KriptoKey]

Try to read the pin code with Avdi Original, during this process may Avdi can reset your BSI and return to normal. try to use a battery charger during this process.
I welcome your comments

The BSI is Johnson Controls ( 966689568002) BSI04EV K04-00211010. I tried to scan using lexia and x431, these two scanner does not communicate with any module. Everything is completely dead and the engine does not start at all. We have tried to give IG power supply 12V. The instrument panel turns on and the windshield washer starts running but not enter the escanner to any module.
I welcome your comments.
Thank you

[rachmach]

you cod pin is :
pkml
or
kmlm