View Full Version : Galleto V54
evisdaci
3rd December, 2015, 02:13 PM
I have Galleto V54 from china, I have problem with OBD reading. I can't read the ECU from OBD. Today I have tried to read a EDC16C39 ECU and i read with BDM but when I tried to read with OBD it is impossibile. I have tried on some car like Fiat Punto, Fiat punto evo, Fiat Doblo, Opel Corsa B, and some car but I can't read. Before i haven't problem. I have change all component with new and good quality but nothing. Only LM393 i have not change for moment. Please any help for this
vasco fernandes
3rd December, 2015, 03:34 PM
My galletto v54 china can read this ecu
evisdaci
3rd December, 2015, 04:07 PM
My galletto not. I don't know why. What is your windows
BrunoXme
3rd December, 2015, 07:05 PM
My galletto china copy works very well. I have tested it on about 50 cars on OBD, mostly Alfa and Fiat but did a few VW as well. Tried BDM with some Marelli ECUs and works fine. I got WIN7. I would say that your Galletto unit is not working. Bad luck maybe. If BDM works, it should be just a small problem inside the box because leads on BDM port are basically the same as the ones on the OBD connection port. Let it check by some electrician
vasco fernandes
3rd December, 2015, 07:29 PM
My galletto not. I don't know why. What is your windows
w7 32bits
you try read the k line or can ?
evisdaci
3rd December, 2015, 08:24 PM
yes i have tried, but nothing. I thing is a problem with my galletto
evisdaci
6th December, 2015, 09:59 PM
BrunoXme (http://www.digital-kaos.co.uk/forums/member.php/454492-BrunoXme)
please can you post a photo from your PCB of your galleto. I have need to see the components inside box.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.