PDA

View Full Version : EDC16C9 connection Alientech


ersin031
5th December, 2015, 04:54 PM
Hello can somebody help me with the Connection to a EDC16C9 with AlienTech
carmageddon
5th December, 2015, 05:34 PM
its a simple bdm connection ecu

http://obrazki.elektroda.net/97_1290357401.jpg
ersin031
5th December, 2015, 05:43 PM
its a simple bdm connection ecu

http://obrazki.elektroda.net/97_1290357401.jpg

Okay i know this Points on the ECU but the Problem is that i had a Galleto V54 which is not working at the Moment and i have to connect it with Alientech.
I have a Alientech KESS V2 with an KTAG cable but dont know how the pinout is
ersin031
5th December, 2015, 05:46 PM
Okay i know this Points on the ECU but the Problem is that i had a Galleto V54 which is not working at the Moment and i have to connect it with Alientech.
I have a Alientech KESS V2 with an KTAG cable but dont know how the pinout is

This is the pinout of my cable

FROM LEFT TO RIGHT:
1：GREEN-CAN L
2：ORANGE-VKEY
3：YELLOW-K LINE
4：ORANGE-VKEY
5：RED-VECU
6：BLACK-GND
7：BLACK-GND
8：PURPLE-VPP
9：RED-VECU
10：WHITE-CAN H
11：BROWN-RESET
12：GRAY-BOOT
13：BLUE-CNF1
carmageddon
6th December, 2015, 07:18 AM
kess is only for : obd, boot mode tricore, boot mode st....but not BDM