View Full Version : EDC16C9 connection Alientech
ersin031
5th December, 2015, 04:54 PM
Hello can somebody help me with the Connection to a EDC16C9 with AlienTech
carmageddon
5th December, 2015, 05:34 PM
its a simple bdm connection ecu
http://obrazki.elektroda.net/97_1290357401.jpg
ersin031
5th December, 2015, 05:43 PM
its a simple bdm connection ecu
http://obrazki.elektroda.net/97_1290357401.jpg
Okay i know this Points on the ECU but the Problem is that i had a Galleto V54 which is not working at the Moment and i have to connect it with Alientech.
I have a Alientech KESS V2 with an KTAG cable but dont know how the pinout is
ersin031
5th December, 2015, 05:46 PM
Okay i know this Points on the ECU but the Problem is that i had a Galleto V54 which is not working at the Moment and i have to connect it with Alientech.
I have a Alientech KESS V2 with an KTAG cable but dont know how the pinout is
This is the pinout of my cable
FROM LEFT TO RIGHT:
1:GREEN-CAN L
2:ORANGE-VKEY
3:YELLOW-K LINE
4:ORANGE-VKEY
5:RED-VECU
6:BLACK-GND
7:BLACK-GND
8:PURPLE-VPP
9:RED-VECU
10:WHITE-CAN H
11:BROWN-RESET
12:GRAY-BOOT
13:BLUE-CNF1
carmageddon
6th December, 2015, 07:18 AM
kess is only for : obd, boot mode tricore, boot mode st....but not BDM
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.