Blaupunkt CD 30 [Sitemap]

dimet

7th December, 2015, 09:58 PM

Helo
I have radio Blaupunkt CD 30 from other car and i need married it. I have "Display safe".
I have dump from radio eprom 95640 and from display eprom 93C56 and i dont know pin from car.
I need read pin from display eprom 93C56 and virgin dump for radio eprom 95640.

shooting

7th December, 2015, 10:10 PM

bogege

7th December, 2015, 10:23 PM

I need read pin from display eprom 93C66
Where is this dump ??

dimet

7th December, 2015, 10:42 PM

My mistake 93c56

dimet

8th December, 2015, 05:24 PM

Can someone explain to me the procedure with op-com? How to sinhronise this car radio.

shooting

8th December, 2015, 06:24 PM

Can someone explain to me the procedure with op-com? How to sinhronise this car radio.

http://opcomforum.yolasite.com/guides-and-info.php

Some guides

wbr

EDIT: sorry, radio guide currently missing from these guides

dimet

8th December, 2015, 06:33 PM

i put dump unregistered and program with code from display. Now on display "radio safe" and beep in speakers.

bogege

8th December, 2015, 07:02 PM

Display original Is this car?

bogege

8th December, 2015, 07:25 PM

Try this dump:

Use the car pass!

shooting

8th December, 2015, 07:32 PM

i put dump unregistered and program code from display. Now on display "radio safe" and beep in speakers.
If you see "RADIO SAFE" and a beep every 10 seconds, this means that the Radio
is currently in Delivery Mode, and is now ready to be programmed to the vehicle
with a OBDII programmer.

wbr

KierAn20

8th December, 2015, 07:41 PM

I make the display code 8335 - reading manually out of hex :witless:

dimet

8th December, 2015, 11:35 PM

yes original

dimet

8th December, 2015, 11:38 PM

If you see "RADIO SAFE" and a beep every 10 seconds, this means that the Radio
is currently in Delivery Mode, and is now ready to be programmed to the vehicle
with a OBDII programmer.

wbr

I will try tomorow again with opcom. Radio
is currently in Delivery Mode.

dimet

9th December, 2015, 10:47 AM

If you see "RADIO SAFE" and a beep every 10 seconds, this means that the Radio
is currently in Delivery Mode, and is now ready to be programmed to the vehicle
with a OBDII programmer.

Programing with opcom is ok but radio beep and on display "radio safe". I do not know where is problem.

shooting

9th December, 2015, 10:56 AM

Programing with opcom is ok but radio beep and on display "radio safe". I do not know where is problem.

What OPCOM have you got? is it a China cable or a proper OPCOM?

wbr

dimet

9th December, 2015, 11:06 AM

What OPCOM have you got? is it a China cable or a proper OPCOM?

wbr

China opcom

shooting

9th December, 2015, 11:08 AM

China opcom

This is your problem, you'll need a proper OPCOM to pair radio to display..
China software doesn't have all the options..

wbr

KierAn20

9th December, 2015, 11:34 AM

Please read both radio and display dumps again and post here, just need to see what is changing and what is not changing when it should be.

dimet

15th December, 2015, 09:49 PM

This is your problem, you'll need a proper OPCOM to pair radio to display..
China software doesn't have all the options..

wbr

Shooting sorry but I think that the file you sent was not well made. I tried the original op-com but no results. I returned the original file and returned radio owners.

shooting

15th December, 2015, 09:53 PM

Shooting sorry but I think that the file you sent was not well made. I tried the original op-com but no results. I returned the original file and returned radio owners.

File 100% fine.., (only a unregister file) maybe a setting in OPCOM, what version of software are you using?
Maybe simpler using a Tech2 to pair them..

wbr