Need immo off for mini cooper

[waldigsi]

Hello
He needs help is turned off immo , Mini Cooper 1.6 16V 2006
ECU Siemens VDO
S122237006B
Thank you

[alyvo]

Try this ! Pass PM.

[waldigsi]

Thank you, tomorrow see if the file works. Regards

[waldigsi]

Unfortunately does not work, you still need help

[okura]

CAS or EWS?

[waldigsi]

EWS 4.3, and why do you ask ?

[bram380]

why do you need immo off ?

[waldigsi]

I got the car after another workshop, the engine will not start, I read fault codes, and I P1656 - wrong with the code of EWS, I have no communication with EWS and I can not do diagnosis or synchronization, besides, in the car there is no communication with all ECUs that communicate with the K -bus, I have to communicate only with the engine ECU and ABS , so I think it would be easier to delete immo than look for faults

[bram380]

K-Bus signal problem.
Check wiring, connector, fuse.

Instrument cluster normal ?

[waldigsi]

A set of indicators to operate normally, lights go out properly, in the car everything works properly but there is no communication with these modules

[waldigsi]

I want to disable immo, give the car owner and get rid of this problem because they've long car is not in use

[koncimobil]

...in the car everything works properly....

then what do you need

[waldigsi]

You can not start the engine and lack of communication with the EWS and other modules

[okura]

if has EWS module possible use emu or check wires and dashboard

[tqnata83]

test 1 more file
it better to repair your immo system
pass in pm

[fear_dark]

try this and report..

[waldigsi]

Hello, I solved the problem, your solution was good, the problem was that I did read 29F400 galletto4 by the OBD connector, and the file has been encoded, enough to read Flasch programmer and move the modification and the engine started up.
Thank you very much for your help and greet

[xxginxx]

hi i need immo off too
i always got error random code and the car is too far from me to go and do sync
the car was AT before then they put MT on it and problem start to come

[Mastr50]

hello i have the same problem like @waldigsi, mini r50 after actualization can't start...
2 dtc code P1616 and P1656 i will diagnose only ECU and abs, ISTA+, ncs, doesn't identyfication car
Mini R50 2002r
S118012001L
here is file from 29F400
Thank you for help

[clements552]

what are the passwords on the files i have the same issue